【食品级PBT VALOX树脂PBT 325FC沙伯基础PBT 325FC】价格_批发_厂家_参数_图片_PBT

1/1

食品级PBT VALOX树脂PBT 325FC沙伯基础PBT 325FC

¥26.00

25-499千克

¥25.50

≥500千克

产品规格

可售数量： 12000千克

东莞市樟木头国嘉源塑胶原料经营部

实名企业

12年

经营年限

广东东莞

所在地区

8.0

综合评分

全部产品进入店铺

图文详情

产品属性

食品级PBT VALOX树脂PBT 325FC沙伯基础PBT 325FC

Tensile Stress, yld, Type I, 50 mm/min	60	MPa	ASTM D 638
Tensile Stress, brk, Type I, 50 mm/min	60	MPa	ASTM D 638
Tensile Strain, yld, Type I, 50 mm/min	7			ASTM D 638
Tensile Strain, brk, Type I, 50 mm/min	15			ASTM D 638
Tensile Modulus, 50 mm/min	2500	MPa	ASTM D 638
Tensile Stress, yield, 50 mm/min	60	MPa	ISO 527
Tensile Stress, break, 50 mm/min	60	MPa	ISO 527
Tensile Strain, yield, 50 mm/min	10			ISO 527
Tensile Strain, break, 50 mm/min	15			ISO 527
Tensile Modulus, 1 mm/min	2550	MPa	ISO 527
Flexural Stress, yield, 2 mm/min	85	MPa	ISO 178
Flexural Modulus, 2 mm/min	2400	MPa	ISO 178
Hardness, H358/30	145	MPa	ISO 2039-1
Hardness, Rockwell R	117	-	ISO 2039-2
IMPACT
Charpy Impact, unnotched, 23°C	NB	kJ/m²	ISO 179/2C
Charpy Impact, unnotched, -30°C	80	kJ/m²	ISO 179/2C
Izod Impact, unnotched, 23°C	NB	J/m	ASTM D 4812
Izod Impact, unnotched, -30°C	NB	J/m	ASTM D 4812
Izod Impact, notched, 23°C	38	J/m	ASTM D 256
Izod Impact, notched, 0°C	36	J/m	ASTM D 256
Izod Impact, notched, -30°C	36	J/m	ASTM D 256
Izod Impact, unnotched 80104 +23°C	NB	kJ/m²	ISO 180/1U
Izod Impact, unnotched 80104 -30°C	100	kJ/m²	ISO 180/1U
Izod Impact, notched 80104 +23°C	4	kJ/m²	ISO 180/1A
Izod Impact, notched 80104 0°C	4	kJ/m²	ISO 180/1A
Izod Impact, notched 80104 -30°C	4	kJ/m²	ISO 180/1A
Charpy Impact, notched, 23°C	4	kJ/m²	ISO 179/2C
Charpy Impact, notched, -30°C	4	kJ/m²	ISO 179/2C
THERMAL
Vicat Softening Temp, Rate A/50	220	°C	ASTM D 1525
Vicat Softening Temp, Rate B/50	185	°C	ASTM D 1525
Ball Pressure Test, 125°C +/- 2°C	PASSES	-	IEC 60695-10-2
Vicat Softening Temp, Rate A/50	220	°C	ISO 306
Vicat Softening Temp, Rate B/50	185	°C	ISO 306
Vicat Softening Temp, Rate B/120	185	°C	ISO 306
HDT/Bf, 0.45 MPa Flatw 80104 sp=64mm	150	°C	ISO 75/Bf
HDT/Af, 1.8 MPa Flatw 80104 sp=64mm	50	°C	ISO 75/Af
PHYSICAL
Specific Gravity	1.31	-	ASTM D 792
Mold Shrinkage on Tensile Bar, flow (2) (5)	2-2.6			SABIC method
Mold Shrinkage on Tensile Bar, xflow (2) (5)	0.9-1.8			SABIC method
Density	1.31	g/cm³	ISO 1183
Water Absorption, (23°C/sat)	0.34			ISO 62
Moisture Absorption (23°C / 50 RH)	0.08			ISO 62
Melt Volume Rate, MVR at 250°C/2.16 kg	20	cm³/10 min	ISO 1133
Melt Volume Rate, MVR at 250°C/5.0 kg	50	cm³/10 min	ISO 1133
Melt Viscosity, 260°C, 1500 sec-1	165	Pa-s	ISO 11443