- 产品
- 详情
- 推荐
收藏
¥面议
1台起订
产品规格
可售数量： 99台
YGW-40B钢筋反复弯曲试验机
一、产品介绍
YGW-40B钢筋反复弯曲试验机是由我公司研制开发的 新型钢材弯曲试验机，本机采用卧式结构设计，具有美观紧凑、弯曲角度任选自控、停车后无惯性、操作方便快捷、性能可靠等特点。
YGW-40B钢筋反复弯曲试验机可以完成带肋钢筋、棒材、管材、板材等金属材料的弯曲及反弯曲试验，测定其弯曲塑性变形能力。
二、试验方法
GB/T1499.2-2007《钢筋混凝土用钢第2部分：热轧带肋钢筋》
YB/T5126-2003《钢筋混凝土用钢筋弯曲和反向弯曲试验方法》
GB/T232-1999《金属材料弯曲试验方法》
GB/T244-1997《金属管弯曲试验方法》
三、产品详情
1、本机结构紧凑，刚性强，弯曲试验操作方便快捷；
2、采用液压双向油缸加载，加荷速度快、效率高，液压油路中设计有压力传感器装置，对试样弯曲进行弯曲压力显示，并可适当进行弯曲负荷保持。活塞前端设计弯心快换机构，快速更换不同规格弯心；
3、采用专有技术设计的支撑距离调整机构、弯心行程调整、弯曲角度指示机构、反弯压头，使正反弯曲试验准确、平稳、可靠；
4、可完成弯曲钳口的同步进退，以调整弯曲支点距离，能够进行180°弯曲试验；
5、本机采用光电编码器进行角度测量，控制显示准确、可靠，弯曲角度任意设置，具备弯曲角度显示装置；
6、本机设有氧化皮回收装置，可将氧化皮通过内部接料盘自动流回机外料桶中。
四、技术参数
序号 | 项目 | 参数 |
1 | 产品型号 | YGW-40B |
2 | 推力 | 160KN |
3 | 工作行程 | 400mm |
4 | 支辊间距离 | 135-640mm |
5 | 弯曲圆试样直径 | Ф8-40mm |
6 | 试样厚度x高度(板材) | (6-40)x50mm |
7 | 弯曲角度范围 | 0-180° |
8 | 系统工作压力 | 31.5Mpa |
9 | 随机配备弯心压辊直径 | Ф36mm, Ф42mm, Ф48mm, Ф54mm, Ф56mm, Ф60mm, Ф64mm, Ф66mm, Ф72mm, Ф75mm, Ф80mm, Ф112mm |
10 | 弯心直径范围 | Ф10-192mm(供用户选择配置) |
11 | 弯曲钳口 | Ф25-32mm,46x265mm |
12 | 主电机功率 | 4kw |
13 | 外形尺寸 | 1250x800x1100mm |
14 | 机器重量 | 1200kg |
YGW-40B steel wire reverse bending testing machine
1.brief introduction
The YGW-40B steel reverse bending testing machine adopts horizontal structure, very attractive and compact. Bending angle can set freely, no inertia when stop, very easy and convenient to operate.
YGW-40B steel reverse bending testing machine it to do bend and rebend test for materials of ribbed steel bar, steel rod, steel plate, etc. By the test, bend plastic properties of test sample can be measured and determined.
2.test method
GB/T 1499.2-2018 steel for the reinforcement of concrete---part 2:hot rolled ribbed bars
ISO 6935-2:2015 steel for reinforcement of concrete---part 2:ribbed bars
YB/T5126-2003 steel bars for reinforcement of concrete---bend and rebend tests
ISO 10065:1990 steel bars for reinforcement of concrete---bend and rebend tests
GB/T 232 metallic materials---bend test
ISO 7438:2016 metallic materials---bend test
GB/T244 metallic materials---tube---bend test
ISO 8491:1998 metallic materials---tube(in full section)---bend test
3.features
3.1 compact structure, high rigid, easy and convenient for bend test operating
3.2 hydraulic two-direction oil cylinder, loading quick.
3.3 pressure sensor measure bending pressure and with functions of force keeping.
3.4 mandrel quick switch mechanism at the front of piston, mandrel can be changed very quickly and conveniently
3.5 with support distance adjusting, mandrel stroke adjusting and bend angle display functions, very stable, accurate and reliable in bend and rebend test.
3.6 bend fixture can be move forward and backward synchronously to adjust bending pivot. 180 degree bending test is also allowed on the machine.
3.7 angle measuring adopts photo-electrical encode, accurate and reliable. Bending angle can be set freely in the range of 0 to 180 degrees.
4. technical specification
No. | Item | Spec. |
1 | Model | YGW-40B |
2 | Force capacity | 160KN |
3 | 工作行程Stroke | 400mm |
4 | Distance between rollers | 135-640mm |
5 | Sample diameter | Ф8-40mm |
6 | Sample thickness and length(for plate) | (6-40)x50mm |
7 | Bend angle range | 0-180° |
8 | Rated working pressure | 31.5Mpa |
9 | Roller diameter | Ф36mm, Ф42mm, Ф48mm, Ф54mm, Ф56mm, Ф60mm, Ф64mm, Ф66mm, Ф72mm, Ф75mm, Ф80mm, Ф112mm |
10 | Mandrel diameter | Ф10-192mm |
11 | Bending fixture | Ф25-32mm,46x265mm |
12 | Motor power | 4kw |
13 | Dimension | 1250x800x1100mm |
14 | Weight | 1200kg |
-
18615632092
-
0531-85890093
钢筋反复弯曲试验机YGW-40B 厂家直销
¥面议
¥面议
99台可售
询价单发送成功～