高强度喷砂材料玻璃砂 F60#80#220#玻璃微珠_人造磨料

1/1

高强度喷砂材料玻璃砂 F60#80#220#玻璃微珠

¥ 3666.00

1吨起订

产品规格

可售数量： 9999吨

郑州市海旭磨料有限公司

28年

经营年限

河南郑州

所在地区

6.6

综合评分

全部产品进入店铺

图文详情

产品属性

玻璃珠30-40#(2)

玻璃珠20-40#(2)

玻璃珠20-40#(1)

玻璃珠5

玻璃珠4

玻璃珠3-3.5mm

玻璃珠2-2.5mm

玻璃珠1

喷砂材料玻璃砂 F60#80#220#玻璃微珠

一.喷砂玻璃微珠Glass Bead for Sand Blasting

玻璃珠是广泛用于清理和金属表面强化处理等工艺的一种磨料，主要用于喷砂设备。

Glass beads is widely used in cleaning and metal surface strengthening treatment technology,it isa unique feature of abrasive,mainly used for sand blasting equipment.

二.研磨玻璃珠Glass beads for Grinding

根据玻璃珠表面光滑，粒度均匀，硬度高，耐磨性稳定性好的优点，玻璃珠呗广泛应用于分散剂、研磨介质和填充材料在天,油漆,油墨,化学工业。

With the advantages of smooth surface, even size, high hardness, wearable and stable, widely used as disperser, grinding media and filler materials in day, paint, ink and chemical industry.

三.道路反光玻璃珠Glass beads for road making

将符合标准的玻璃微珠按照一定比例与涂料混合，利用玻璃微珠的球形反光特性，车灯照在带有玻璃微珠的标线上，可以使车灯的光线平行的反射回来，使司机看清前进的方向，从而司机夜间行车的。Improve the road marking line contrary reflection function. When driving at night, the lamp shines on the marking line with glass bead in it, the ray of lamp is reflected backparallelly. So the driver can look at the road clearly and drive safely at night.

四：可生产型号size we offer

Type	美国标准 US STD. SCREEN	粒度范围 SIZE OPENING (MICRONS)		成圆率 MIN. SPHERE COUNT	中国标准 GB STD. SCREEN		粒度范围 SIZE OPENING (MICRONS)
Sandblasting size	20 to 30	850 to 600		80 %	GB 30#		400 to 800
	30 to 40	600 to 420		80 %	GB 40#		250 to 400
	40 to 50	420 to 300		80 %	GB 60#		200 to 250
	50 to 70	300 to 210		85 %	GB 80#		150 to 200
	60 to 80	250 to 180		85 %	GB 100#		110 to 150
	70 to 100	210 to 150		85 %	GB 120#		100 to 140
	80 to 120	180 to 120		85 %	GB 150#		80 to 110
	100 to 17	150 to 90		90 %	GB 180#		70 to 100
	120 to 20	125 to 75		90 %	GB 220#		50 to 80
	140 to 230	105 to 62		90 %	GB 280#		40 to 70
	170 to 325	90 to 45		95%	GB 320#		1 to 40
	270 and fine	53 to 0		95 %
Grinding size	0.8mm~1.0mm,1.0mm~1.5mm,1.5mm~2.0mm,2.0mm~2.5mm,2.5mm~3.0mm, 3.0mm~4.0mm,4.0mm~ 5.0mm,5.0mm~6.0mm,6.0mm~7.0mm
Glass beads For road making
Type			粒径范围 size distribution (um)			质量百分比 quantity(%)
1号:用作热熔涂料标线的面撒珠 No.1:Drop on hot melted coating&road mark lines			>850			0
			850—600			5—30
			600—300			30—80
			300—106			10—40
2号:用作热熔涂料的预混珠 No.2:Pre-mixed in traffic paint			>600			0
			600-300			40-90
			300—150			5—60
			<1500-5			<1500-5
3号:常温溶剂型涂料标线的面撒 No.3:Drop on normal atmospheric solvent coating			>212			0
			<90			0-4