- 产品
- 详情
- 推荐
收藏
¥ 22.00
25千克起订
产品规格
可售数量： 45000千克
防火阻燃V0级PC+ABS合金料|德国拜耳|FR2010
防火阻燃V0级PC+ABS合金料|德国拜耳|FR2010
徳国拜耳PC/ABS Bayblend T95 MF 矿物填料9.0%
徳国拜耳PC/ABS Bayblend FR3015 无溴阻燃
徳国拜耳PC/ABS Bayblend FR3020 无溴阻燃
徳国拜耳PC/ABS Bayblend FR3050 无溴阻燃
徳国拜耳PC/ABS Bayblend FR3100 TV 无锑阻燃
徳国拜耳PC/ABS Bayblend FR3200 TV 无锑阻燃
徳国拜耳PC/ABS Bayblend FR3210 TV 无锑阻燃
徳国拜耳PC/ABS Bayblend FR3110 TV 无锑阻燃
徳国拜耳PC/ABS Bayblend FR410 MT 矿物填料10%
徳国拜耳PC/ABS Bayblend FR610 GR 无锑阻燃
徳国拜耳PC/ABS Bayblend FR630 GR 无锑阻燃
徳国拜耳PC/ABS Bayblend FR632 GR 无锑阻燃
徳国拜耳PC+ABS Bayblend KU 1-1446 电镀级
ABS/PC(注塑工艺)
料筒量度 喂料区 50～70℃（70℃）
区1 230～250℃（250℃）
区2 250～260℃（260℃）
区3 250～270℃（265℃）
区4 250～270℃（265℃）
区5 250～270℃（265℃）
喷嘴 250～270℃（270℃）
括号内的量度建议作为根本设定值，行程利用率为35％和65％，模件流长与壁厚之比为50：1到100：1
熔料量度 260～270℃
料筒恒温 200℃
模具量度 70～90℃
打针压力 80～150MPa（800～1500bar）
保压压力 打针压力的40％～50％以防止制品出现缩壁；为了使制品的内应力小化，保压压力应该尽可能性安装低
背压 只要5～10MPa（50～100bar），防止发生摩擦热
打针速度 中等打针速度，将摩擦热降至小；多级打针；对有些制品建议采用从慢到快
螺杆转速 螺杆转速折合线速度为4.0m/s
The metering stroke (1.0 ~ 3.0) D of Huayun Plastics company, because the melt material is very sensitive to overheating and the residual period in the barrel is too long; the residual period of the electric sprayer should not exceed 6 minutes, the retention time in the hot runner should be as small as possible 2 ~ 5 mm, which originates from the metering stroke and the recovery of the screw diameter after pre-drying at 80 °C for 4 hours, and can take part in the 20% recycle, as long as the material has not undergone thermal degradation and has been properly predried, it is better to have an ISOTROPIC shrinkage of 0.5% ~ 0.7% for products requiring less strength, and 0.2% ~ 0.4% for glass fibre reinforced gating systems, any kind of ordinary gate can be used; there is a hot runner at the gate, the measurement must be closed loop to control the machine shutdown period, shut down heating, electric sprayer operates the machine to clean the drum and barrel apparatus as if operating an extruder, the diameter of the standard screw is 50mm; for the large diameter screw, the geometric size of the smaller and shorter measuring section is adopted; the Stop Ring and the through nozzle are adopted.
-
13556776933
-
0769-87600377
防火阻燃V0级PC+ABS合金料|德国拜耳|FR2010
¥ 22.00
¥22.00
45000千克可售
询价单发送成功～