【6.0mm脱硫活性炭精脱硫用活性炭】价格_批发_厂家_参数_图片_活性炭

1/1

6.0mm脱硫活性炭精脱硫用活性炭

¥4.00

1-999千克

¥3.60

1000-9999千克

¥3.50

≥10000千克

产品规格

可售数量： 110997千克

平泉县兰天活性炭厂

13年

经营年限

河北承德

所在地区

2.5

综合评分

全部产品进入店铺

图文详情

产品属性

脱硫活性炭介绍：

脱硫活性炭是一种含硫材料制成的外观呈黑色、无味、无毒活性炭。脱硫活性炭内部孔隙结构发达，比表面积大，吸附能力强的一类微晶质碳素材料，是一种常用的吸附剂。活性炭按外观形状分为：粉状、颗粒状、不规则颗粒状、圆柱形、球型和纤维状等。脱硫活性炭指的是在汽油精制过程中，利用活性炭负载磺化钛氰钴，对原油中超标硫醇进行脱除，从而减少汽油含硫量，提高品质。符合国家环保排放的要求。

脱硫活性炭特点

比表面积大、吸附值高。作为装载磺化钛氰钴的活性炭，要求吸附值要高，中孔发达，负载量超过普通活性炭。

强度好，不易碎。由于负载磺化钛氰钴活性炭，要在固定床中反复接受压力考验，溶液浸泡，所以要求强度要高，颗粒比较好是自然形状。

灰份杂质含量少。为了确保催化剂顺利进行化学反应，要尽量减少炭中灰份，金属离子等各种杂质含量。提高活性炭孔隙利用率。

水分低。尽可能保持活性炭较低水分，避免影响其功能发挥。

脱硫活性炭用途：

脱硫活性炭广泛用于冶金、载银、电镀、轻工、石化、食品、印染、味精、油脂脱色、溶剂回收、催化剂载体、空气净化、水处理、三聚氰氨、糖用、液相用、清塔、吸油、各种精脱硫等。对气体与液体的除臭、除毒、脱色有很好的效果，用于净化半、原料气、油田气、煤气、及二氧化碳气体中的H2S及部分有机硫化物。

脱硫活性炭理化指标：

粒度	碘值mg/g	四氯化碳	灰份	栈积重g/L	强度	水份
Ф4.0	900	55	6-12	400	95	5
Ф4.0	1050	70	8-12	380	90	5
Ф4.0	1100	80	8-15	360	90	5
8x16	>1000	60	8-12	400	95	5
4x10	>1050	70	8-15	380	90	5

包装及运输：

采用编织袋包装，内衬塑料薄膜，每袋25kg也可按客户需求包装，产品在贮存时应放置于阴凉干燥处，运输过程中，防止与坚硬物质混装，以防炭粒破碎，影响质量。防止包装破损以免漏失或混入杂物，防水浸防油防火。

联系方式
厂名：平泉县兰天活性炭厂

地址：中国河北平泉县平泉镇红花沟村
刘敏
手机：
Q Q：2259151836
邮箱：2259151836@OO.com
网址：

产品实拍

实地拍摄

柱状晾晒图

Desulfurization activated carbon introduction:
Desulfurization activated carbon is a sulfur containing materials made of the appearance of black, tasteless, non-toxic activated carbon. Desulfurization activated carbon with well-developed pore structure, large specific surface area, strong adsorption capacity of a type of micro crystalline carbon material, is a commonly used adsorbent. Activated carbon according to the appearance of the shape is divided into: powder, granular, irregular granular, cylindrical, spherical and fibrous, etc.. Activated carbon desulfurization in gasoline refining process, using activated carbon supported cobalt sulfonated titanium, of the crude oil in overweight mercaptan removal, thereby reducing gasoline sulfur content, improve quality. Meet the requirements of the national environmental protection.
Desulfurization activated carbon characteristics
Large specific surface area, high adsorption value. As the loading of sulfonated cobalt phthalocyanine activated carbon, methylene blue adsorption value is higher, the hole developed, load more than ordinary activated carbon.
Strength is good, not fragile. Because the load of sulfonated cobalt phthalocyanine activated carbon, to accept the pressure test again and again in the fixed bed, immersed in the solution, so the strength requirements are higher, the particles are preferably natural shape.
The content of ash less impurity. In order to ensure thesmoothchemical reactioncatalyst, tominimizecarboninash, metal ion and other impurities. Increase the utilization ratio of activated carbon.
The water is low. As far as possible to maintain the minimum water content of activated carbon, to avoid the impact of its functions to play.
Desulphurization activated carbon use:
Activated carbon desulfurization are widely used in metallurgy, silver, electroplating, light industry, petrochemical, food, medicine, printing and dyeing, MSG, oil decolorization, solvent recovery, catalyst carrier, air purification, water treatment, melamine, with sugar, liquid phase, clear tower, oil, all kinds of fine desulfurization. The gas and liquid deodorant, in addition to poison, decolorization has a good effect, for the purification of semi water gas, raw gas, gas, oil, gas, and carbon dioxide in the H2S and some of the organic sulfide.

contact information：
Factory name: Pingquan County Lantian Activated Carbon Factory
Address: China Pingquan Hebei Pingquan County town of safflower Village
Contact: Liu Min
Hand machine:
Q Q:2259151836
Mail box: 2259151836@OO.com
Website:

联系方式
厂名：平泉县兰天活性炭厂