【直销双膜足贴包装机 60-80双膜颗粒/粉剂包装机全自动足贴机】价格_批发_厂家_参数_图片_多功能包装机

1/1

直销双膜足贴包装机 60-80双膜颗粒/粉剂包装机全自动足贴机

¥ 26000.00

1台起订

产品规格

可售数量： 100台

广州市中凯包装专用设备有限公司

采通通 6 年资质认证实名企业

14年

经营年限

广东广州

所在地区

10.0

综合评分

全部产品进入店铺

图文详情

产品属性

直销双膜足贴包装机 60*80双膜颗粒/粉剂包装机全自动足贴机示例图1

ZK-60FS （全自动双膜粉剂包装机）

ZK-60FS (Full-AutomaticTwo LinePowder Packing Machine)

一、适用范围：

适用于食品、医药、化工、农药产品中的120-400目的的粉末物料的全自动包装；如：食品添加剂、奶粉、豆粉、蛋、中药粉、面膜粉、保健茶粉等。

Scope of application:

This machine is widely applied for food , pharmacy eutical , and chemical products in mesh size range from 120 to 400 , such as milk powder , soya powder , cosmetic powder , slimming tea , medical powder and so on .

二、本机特点：

1、自动包装机可以在包装过程中自动完成计量、制袋、充填、封口、切断、计数、批号等全部工作；

2、控制系统则自动化匹配各动作配合，改系统具有精准确度高，调整制袋长度简便，且准确无误；

3、具有色标控制系统，可获得完整的商标图案；

4、无级调整速度与袋长，包装速度与制袋长度可在额定范围内无级调整，不需要更换零件；

5、设计采用独特的嵌入式封口，加强型热封机构，智能型温控仪温度控制，具有良好的热平衡适应各种的包装材料，性能好、噪音低、封口纹路清晰、密封性强；

直销双膜足贴包装机 60*80双膜颗粒/粉剂包装机全自动足贴机示例图2

6、设备计量下料方式为螺杆计量下料；

7、设备封口形式双膜走袋，四边封封口；

8、设备主体部分和与物料接触部分材料为不锈钢304；

9、设备自带一套螺杆、成型器。

Main features:

1. Automatic finish weight , bag-making , filling , sealing , cutting , counting , lot number and so on ;

2. Automatic optimization match with all the program , this system can alternate the length of bag , thus it is easy and precise ;

3. It has color system controller , so can get the complete trade mark design ;

4. The length of bag and bag packing speed can be alternated by chain-gear step speed varieties without changing spare parts ;

直销双膜足贴包装机 60*80双膜颗粒/粉剂包装机全自动足贴机示例图5

5. Unique-laidembedded mouth sealing , enhanced hot sealing mechanism , intelligent temperature control by temperature controller , featuring fine heat balance , fine packaging , performance , low noise , clear sealing texture and strong sealing performance ;

6. The machine use screw to measure ;

7. Themachine is two line working , four sides seal type ;

8. The material of main parts and contacted material of the machine is stainless 304 .

三、技术参数/Technique Performance：

包装速度/Capacity	30-60bags/min
包装范围/Range of measurement	1-10g
制袋规格/Bag Size	（L)40-150 (W）40-100mm
精确度/Accuracy	正负2%
封口形式/Sealing type	双膜走袋，四边封口
功率/Power	1250W
电源/Voltage	380V/50HZ 220V/50-60HZ
包装材料/Packing material	Paper/the polyethylene，polyester/aluminum foil/polyethylene，nylon/polyethylene，tea filter paper，etc 纸/聚乙烯、聚脂/铝箔/聚乙烯、尼龙/聚乙烯、茶叶滤纸等
净重/Net weigh	220kgs
毛重/Gross weigh	250kgs
外形尺寸/Overall Dimension	（L)1100(W）750（H）1680mm
包装后尺寸/After Packing	（L)1250(W）850（H）1800mm

直销双膜足贴包装机 60*80双膜颗粒/粉剂包装机全自动足贴机示例图7

四、全自动特点：

◆无极调速：包装速度在一定范围内可以无级调整，达到与制袋、充填、封合、切断环节匹配，使包装过程稳定可靠。

◆袋长可在额定范围内任意设定，步进电机驱动，拉袋稳定可靠，速度可选定。

◆在包装膜有色标定位标志时，制袋过程可实现光电自动检测、定位、封合、切断，保证了制袋图案完整。

◆具有自诊断、故障提示功能。

◆温度控制用高精度的PID调节，具有极好的热封合稳定性，保证了对不同材料的封合质量。

◆操作维修方便：间歇式结构简单，易于操作和维修。

◆通用性强：通过更换不同的充填头便可达到一机多用的目的。

◆自动打印产品批号，可加易撕口，便于使用。

◆全套采用优质器件，质量稳定，噪音小，故障率低，使用寿命长。

本机小巧独特，外形美观，所有与物料接触的器件均由不锈钢和无毒耐腐塑料制成，符合食品和医药包装的要求（即GMP要求）。特别适用于食品、医药及化工等行业。

直销双膜足贴包装机 60*80双膜颗粒/粉剂包装机全自动足贴机示例图10

The features of full-automatic：

u Speed Limitless: Packing speed shall be limitless arranged in some extend , which can best match the steps of making bag/fulfilling/sealing and cutting .

u The bag length can be set free at some specific range , using the “Bujin” Motor , making bags stable and the speed can be controlled .

u The process of bag-made can reach self-automatic inspecting/location/sealing and cutting when there are the signs of color locating in packing films .

u Equipment itself has the function of self-diagnosing and error-pointing .

u Controlling temperature by high exact PID , which ensure the sealing quality of different packing film material and will be in more stable of hot sealing .

u Conveniently operate and repair , because of its intermittent simple structure .

u Common using available：Packing1-120g in a bag by changing the measure glass .

u Automatically print production lot No. , and adding the easy-tear type convenient .

l Using the superior steel parts , quality to be stable , noise to be bitter , error rate to be low and service life to be long .

l Good appearance , smart and unique , the steel of contacting material is stainless steel or poisonousless and corrosion resistance plastic , which reaches the packing requirement of food and medicine ( say GMP ) , especially available in the industries of food , medicine .