登封市大冶镇双奇磨料厂是一家经国家相关部门批准 的企业，主要经营碳化硅、棕刚玉、白刚玉、黑刚玉、核桃壳、石榴石、除锈砂、铝矾土、捣打料、耐火泥等各种耐材材料及磨料。厂家拥有完整、科学的质量管理体系，多年来登封市大冶镇双奇磨料厂的诚信、实力和产品质量获得业界的认可。厂家秉持诚信态度，紧跟时代潮流开拓创新，拥有多条生产线，充分满足新老客户的需求，欢迎各界朋友莅临参观、指导和业务洽谈！

       铜矿砂是以炼铜水淬渣为原材料，采用机械化作业，经颗粒化、干燥、筛分处理而成具有外形带有梭角不含杂物的玻璃晶体，具有材质硬和水泥粘合强度高、喷射除绣效率高的特点，被喷射工件表面能达到SR2.5--3.0；不含游离二氧化硅无硅尘危害操作工人身体健康等主要特点；广泛用于造船、耐磨地坪、修船、机械、石化、铁路、建筑等行业。

       双奇铜矿砂具有硬度高，外形有棱角，磨削快，可溶性氯离子含量低，喷砂时粉尘极少，无污染，除锈效果优于其它除锈砂，并且价格低廉，重复利用率高。因此，产品被广泛用于各大修理厂、造船厂及大型钢结构防腐工程的喷砂除锈；耐磨地坪地坪骨料（仓库、码头、车间、停车场、工业厂房等须高度耐磨损的地面，使用铜矿砂可提升地面的强度、硬度、耐磨性及抗冲击性）；配重填充材料等。

       巩义市双奇耐材磨料公司生产的铜矿砂具有硬度高、外形有菱角、喷射效果好，在行业中销量长期 ，双奇铜矿砂与石英砂相比其除锈效果要比石英砂好。

       1、多菱角形、效率快于石英砂，因石英砂喷射出去碰到铁之后变成了粉状和圆球状，而铜矿砂碰到铁之后分裂成2-3个铜矿砂，其形状不变，其锋利的刃在除锈中效果非常快，可以回收利用3次。而石英砂因形状变为球状而除锈效果大大降低。

       2、石英砂因其碰到铁后形成粉尘而造成了环境污染，工人容易得职业病，钢铁面板上形成一层石英粉，影响下道序的施工和施工质量，其铜矿砂没有上述情况，这也是这么多年大型 防腐公司和大型造船厂改用铜矿砂的原因。

       1、用于船舶制造与修理、钢结构制作、集装箱修理、桥梁、油罐制造等领域的喷涂除锈，除锈后钢材表面除锈等级可以达到Sa3.0级。

       2、用于建筑方面：与特殊粘合剂配合可制成坚硬地板砖或地坪骨料，加固地面，如耐磨地坪、码头、铁路货场、高等级高速公路等。

       3、其他应用：经过精细加工生产出来的铜矿砂还适宜喷牛仔布及各种其他使用。

       铜矿砂地坪施工工艺：

       当基层砼初凝前5-6成干时，铺撒骨料，力求铺撒均匀，撒料分两次进行，且保证用量；

       1、 次铺撒总量的2/3，用磨光圆盘压实搓毛；

       2、 次铺撒总量的1/3，用抹光圆盘压实搓毛；

       3、初凝后，用压光机抹光一遍；

       4、检查撒料抹后的平整度，对低洼处及时扑料调整，再对该处压实搓毛，抹光处理；

       5、完工前，用抹光机作抛光处理达到工艺完成。

登封市大冶镇双奇磨料厂

联 系 人：郭经理

电   话：

Q    Q : 2901034436

地   址：登封市大冶镇朝阳沟村

网   址：http:// shop 91.*

Introduction of copper ore

Copper ore and copper slag, copper smelting writing after extraction of copper slag, also known as slag. By crushing, screening according to the different USES of the slag and need points and added to the specification. Copper ore and copper ore types are mainly black white quartz sand two kinds. Its mainly used in casting, forging, mechanical, paving, metallurgy, heat treatment, steel structure, space truss structure, containers, ships, building, Bridges, mines, etc, are the raw material of metallurgical industry.

Double odd copper ore with high hardness, angular shape, grinding fast, low soluble chloride ion content, sand dust rarely, no pollution, cleaning effect is better than that of other cleaning sand, and the price is low, repeated utilization ratio is high. Therefore, the products are widely used in the repair shop, shipyards and large steel structure anticorrosion engineering of sandblasting derusting; Wear-resisting floor floor aggregate (warehouse, parking lot, wharf, workshop, industrial workshop etc must be highly resistant to wear and tear of the ground, the use of copper ore can improve the strength, hardness, wear resistance and impact resistance of the ground); Counterweight fill material, etc.

Characteristics of copper ore

Gongyi city double, abrasive resistant material company's copper ore with high hardness, appearance has a water chestnut, injection effect is good, long-term sales lead in the industry, double, copper ore compared with quartz sand its cleaning effect is better than quartz sand.

Efficiency of more than 1. The water chestnut, faster than the quartz sand, because of quartz sand jet out encountered after iron into the powder, and balls, iron and copper ore encounter after split into two or three copper ore and its shape remains unchanged, the sharp edge in the descaling effect very fast, can be recycled three times. And quartz sand for shape into a ball and descaling effect is reduced greatly.

2, quartz sand, because of its form reaches the iron dust and the environmental pollution caused by workers easier occupational disease, a layer of quartz powder is formed on the steel panel, under the influence of the sequence of construction and construction quality, the copper ore without the above situation, it is also a large anti-corrosion company for so many years and large shipyards to switch to the cause of the copper ore.

Copper ore USES

1, used for shipbuilding and repair, steel structure production, container repair, bridge, oil tank made in areas such as spray derusting, steel surface after derusting descaling grade can reach Sa3.0 level.

2, used in construction areas: cooperate with special adhesive can be made into hard floor or floor aggregate, reinforcing ground, such as wear-resisting flooring, port, railway freight yard, high-grade highway, etc.

3, other applications: processed to produce copper ore is suitable for spray denim and various other USES.

Copper ore floor construction process

When the base concrete initial setting before 5-6 into works, spread and aggregate, makes every effort to spread evenly, and divided into two, and guarantee the dosage;

1, the first two-thirds of the spread, rubbing hair in polishing disk compaction;

2, the second path, a third of the total, rubbing hair in finishing disk compaction

3, after the initial setting, with calender finishing it again;

Flatness, after 4, check the material with low areas of flapping is expected to adjust in time, of compaction rub hair again, wipe light processing;

5, before completion, with finishing machine for polishing processing to achieve complete process.

登封市大冶镇双奇磨料厂

联 系 人：郭经理

电   话：

Q    Q : 2901034436

地   址：登封市大冶镇朝阳沟村

网   址：http:// shop 91.*

The town of dengfeng city daye double abrasive factory

Touch: Guo Jingli

Telephone:

Q Q: 2901034436

Address: daye town chaoyang ditch village of dengfeng city

Web site: http:// shop 91.*