登封市大冶镇双奇磨料厂是一家经国家相关部门批准 的企业，主要经营碳化硅、棕刚玉、白刚玉、黑刚玉、核桃壳、石榴石、除锈砂、铝矾土、捣打料、耐火泥等各种耐材材料及磨料。厂家拥有完整、科学的质量管理体系，多年来登封市大冶镇双奇磨料厂的诚信、实力和产品质量获得业界的认可。厂家秉持诚信态度，紧跟时代潮流开拓创新，拥有多条生产线，充分满足新老客户的需求，欢迎各界朋友莅临参观、指导和业务洽谈！

       石英砂是采用天然石英矿为原料，经破碎，水洗精筛等加工而成；是一种坚硬、耐磨、化学性能稳定的硅酸盐矿物，其主要矿物成分是SiO2 ，石英砂的颜色为乳白色、或无色半透明状，硬度7，性脆无解理，贝壳状断口，油脂光泽，密度为2.65，堆积密度(1-20目为1.6，20-200目为1.5)，其化学、热学和机械性能具有明显的异向性，不溶于酸，微溶于KOH溶液，熔点1750。

       石英砂是重要的工业矿物原料，非化学危险品，广泛用于玻璃、铸造、陶瓷及耐火材料、冶炼硅铁、冶金熔剂、冶金、建筑、化工、塑料、橡胶、磨料、滤料等工业。目前是水处理行业中使用 广泛、适用量 材料，无杂质，抗压耐磨，机械强度高，化学性能稳定，截污能力 益高、使用周期长，适用于单层、双层过滤池、过滤器和离子交换器中，各项指标均达到（CJ/T43-1999）标准。

       石英砂分类：

       1、 普通石英砂；普通石英砂一般是采用天然石英矿石，经破碎、水洗、烘干、二次筛选而成的一种水处理滤料；无杂质、无校角、密度大、机械强度高、载污能力强、使用周期长的特点，是化学水处理的理想材料。

       2、精制石英砂又称酸洗石英砂；主要用于玻璃制品、耐火材料、熔炼石类、精密铸造、砂轮磨材、冶炼硅铁、冶金熔剂、陶瓷、研磨材料、铸造造型石英砂等方面。

       3、高纯石英砂；高纯石英砂采用优质天然石英石，经过精心挑选，精细加工而成；主要用于冶金、玻璃及玻璃制品、搪瓷、铸钢、水过滤、泡花碱、化工、喷吵等行业。

       4、熔融石英砂；外观为无色透明块状，颗粒或白色粉末。

       5、硅微粉；外观为灰色或灰白色粉末， 耐火度>1600； 容重200250kg/m3。广泛用于化工、电子、集成电路（IC）、电器、塑料、涂料、高级油漆、橡胶、国防等领域。

       1、热膨胀率几乎为零，极低的热导率。

       2、 的热稳定性。

       3、纯度高；SiO2二级含量可达到99.95以上。

       4、专用机械加工生产，堆积密度高、粒度分布稳定。

       双奇石英砂不仅在污水处理方面用截污能力大、使用周期长，经济效益佳的显着特点，在工业研磨抛光领域也被广泛应用；是重要的工业矿物原料，非化学危险品，广泛用于玻璃、铸造、陶瓷及耐火材料、冶炼硅铁、冶金熔剂、冶金、建筑、化工、塑料、橡胶、磨料等工业。

       1、工件涂镀、工件粘接前处理喷砂能把工件表面的锈皮等一切污物清除，并在工件表面建立起十分重要的基础图式（即通常所谓的毛面），而且可以通过调换不同粒度的磨料，比如飞展磨料磨具的磨料达到不同程度的粗糙度，大大提高工件与涂料、镀料的结合力。或使粘接件粘接更牢固，质量更好。

       2、铸造件毛面、热处理后工件的清理与抛光喷砂能清理铸锻件、热处理后工件表面的一切污物（如氧化皮、油污等残留物），并将工件表面抛光提高工件的光洁度，能使工件露出均匀一致的金属本色，使工件外表更美观，好看。

       3、机加工件毛刺清理与表面美化喷砂能清理工件表面的微小毛刺，并使工件表面更加平整，消除了毛刺的危害，提高了工件的档次。并且喷砂能在工件表面交界处打出很小的圆角，使工件显得更加美观、更加精密。

       4、改善零件的机械性能机械零件经喷砂后，能在零件表面产生均匀细微的凹凸面，使润滑油得到存储，从而使润滑条件改善，并减少噪声提高机械使用寿命。

登封市大冶镇双奇磨料厂

联 系 人：郭经理

电   话：

Q    Q : 2901034436

地   址：登封市大冶镇朝阳沟村

网   址：http:// shop 91.*

Quartz sand profile

Quartz sand is a hard, wear-resisting, stable chemical properties of silicate minerals, the main mineral composition is SiO2, quartz sand color for the milky white or colorless translucent, 7 hardness, brittle no cleavage, conchoidal fracture, oily luster, density 2.65, bulk density (1-20 mesh is 1.6, 20-200 mesh is 1.5), the chemical, thermal and mechanical properties has obvious anisotropy, insoluble in acid, slightly soluble in KOH solution, melting point 1750 . Quartz sand is a natural quartz mine as raw materials, after crushing, washed fine sieve, etc, is currently the most widely used in water treatment industry, the largest amount of material, without impurities, compression wear-resisting, high mechanical strength, stable chemical performance, sewage capability, high efficiency, long cycle life, suitable for single, double filter tank, filter and ion exchanger, all the indexes reach the standard (CJ/T43-1999).

Quartz sand abrasive applications

Quartz sand is not only in terms of sewage treatment with cutting carrying capacity big, long cycle life, economic benefits of the distinctive features of beautiful, also widely used in the field of industrial grinding and polishing; Quartz sand is important industrial mineral raw material, the hazardous chemicals, widely used in glass, casting, ceramics and refractories, smelting ferrosilicon, metallurgical flux, metallurgy, construction, chemical, plastic, rubber, abrasive and other industries.

1 adhesive pretreatment, plating workpiece, workpiece sandblasting can put the scale on the surface of the workpiece and all dirt removed, and on the surface it is very important to set up the basis of the schema (usually the so-called hair side), but also by changing different particle size of abrasive, such as flying abrasives abrasive to different degree of roughness, greatly improve the workpiece and the adhesion strength of the coating, plating materials. Or make adhesive bonding stronger, better quality.

2 wool surface, casting, heat treatment after cleaning and polishing workpiece sandblasting can clean up all the dirt on the surface of the casting, heat treatment after forging workpiece (such as scale, oil residue), and improve the finish of workpiece, the workpiece surface polishing can make the metal workpiece with uniform is ecru, make workpiece appearance more beautiful, good-looking.

3, machining burring and beautify the sandblasting surface can clean up the small burr on the surface of the workpiece, and make the surface more smooth, eliminate the dangers of the burr, improve the level of the workpiece. And sand can in workpiece surface junction with small rounded corners, make artifacts appear more beautiful, more precise.

4, improving mechanical properties of parts, mechanical parts after sandblasting, can on the parts surface evenly slightly concave and convex surface, the lubricating oil storage, so that improve lubrication condition, and improve the service life of the mechanical to reduce noise.

登封市大冶镇双奇磨料厂

联 系 人：郭经理

电   话：

Q    Q : 2901034436

地   址：登封市大冶镇朝阳沟村

网   址：http:// shop 91.*

The town of dengfeng city daye double abrasive factory

Touch: Guo Jingli

Telephone:

Q Q: 2901034436

Address: daye town chaoyang ditch village of dengfeng city

Web site: http:// shop 91.*