【提取肝素钠用大孔吸附树脂】价格_批发_厂家_参数_图片_离子交换树脂

1/1

提取肝素钠用大孔吸附树脂

¥ 1.00

1升起订

产品规格

可售数量： 100000升

孝感市科海思环保工程有限公司

35年

经营年限

湖北孝感

所在地区

5.9

综合评分

全部产品进入店铺

图文详情

产品属性

Tulsion® A-722 MP ISO-9001/ISO-14001/OHSAS-18000

食品级提取肝素钠专用大孔吸附型离子交换树脂

STYRENIC MACROPOROUS STRONG BASE ANION EXCHANGE RESIN FOR SUGAR DECOLOURIZATION AND ORGANIC REMOVAL.

Tulsion® A-722 MP is a polystyrenic “Macroporous” strong base (Type-I) anion exchange resin, with matrix containing quaternary ammonium groups, supplied as moist spherical beads in the Chloride form.

Tulsion® A-722 MP has excellent physical characteristics due to its macro porous nature, is used for de-colorization of sugars solutions, where the concentrations of the coloring bodies are relatively high. This resin is easily regenerable by using alkaline brine solution. This resin is generally used in combination with Tulsion® A-30MP acrylic strong base for the removal of residual color from the treated sugar solution.

The advantages of this resin are exceptional physical and chemical stability leading to long life, high operating capacity and low rinse requirements. It is suited for use in a wide range of pH and elevated temperature conditions.

TYPICAL CHARACTERISTICS： Tulsion A-722 MP

Type : Macroporous Strong base anion exchange resin

Matrix structure : Polystyrene copolymer

Functional group : Quaternary Ammonium Type I

Physical form : Moist Powder form

Ionic form : Chloride

Screen size US mesh : 16 to40

Particle size (minm. 95) : 0.4 to 1.2mm

Effective size (mm) : 0.6 to 0.8

Uniform Coefficient : 1.6 max

Backwash settled density : 43 to 45 lbs/ft3 (670 to 720 g/l)

Moisture contents (approx) : 60 ± 3

Thermal stability : 80 °C

pH range : 0 to 14

Solubility : Insoluble in all common solvents

Total exchange capacity : 1.0 meq/gm（min）

TYPICAL OPERATING CONDITIONS： Tulsion A-722 MP

Operating Temperature : 70-80° C

Service flow rate : 8-10 BV/hr

Typical Operating Service flow rates : 2-5 BV/hr

Regenerant used : Alkaline brine
Regeneration Concentration : 10 NaCl + 2 NaOH

Regeneration level                             :            200+20 g/l
Regenerant flow rate                    :              1- 2.5 BV/hr
Regeneration and rinse temperature :                 50-55° C

Rinse flow rate : Slow    :       At regeneration flow rate
                            Fast                                         At service flow rate
Sweetening on volume    :        1.5 to 2 BV (approx)