- 产品
- 详情
- 推荐
收藏
¥110.00
100-499千克
¥105.00
500-999千克
¥100.00
≥1000千克
产品规格
可售数量： 200000千克
Silicone -containing surface additive for solvent-free and solvent-borne coating systems, printing inks and adhesive systems, with strong reduction of surface tension. Very good substrate wetting, prevents cratering, and increases surface slip.
Product Data
Composition
Polyether-modified polydimethylsiloxane
Typical Properties
The values indicated in this data sheet describe typical properties and do not constitute specification limits.
Density (20 °C): 1.04 g/ml
Applications
Printing Inks and Overprint Varnishes
Special Features and Benefits
The additive provides a strong reduction of surface tension of the system. Thus, it especially improves substrate wetting and prevents cratering. Furthermore, it increases surface slip and gloss. LAG603 is a highly effective silicone additive for wetting critical substrates and due to its being solvent-free, it is preferred in systems in which a solvent-free additive is requested, or where intermediate products require specific solvents.
Recommended Use
Recommended for all printing inks and overprint varnishes.
Recommended Levels
0.3-1.0 additive (as supplied) based upon total formulation.
The above recommended levels can be used for orientation. Optimal levels are determined through a series of laboratory tests.
Incorporation and Processing Instructions
The additive can be incorporated during any stage of the production process, including post-addition.
Dilution prior to incorporation can be helpful for easier dosing.
Special Note
Unlike so-called silicone oils, this additive is very user-friendly. Nevertheless, it should be determined
in a series of tests whether foam is stabilized in certain systems. Similarly, the recoatability and cratering should be checked.
Coatings Industry
Special Features and Benefits
The additive provides a strong reduction of surface tension of the coating system, and is a highly effective silicone additive for wetting critical substrates. It prevents cratering, and increases gloss and surface slip. and due to its being solvent-free, it is especially useful in systems in which a solvent-free additive is requested, or where intermediate products require specific solvents.
LAG-603耐高温有机硅流平剂
¥ 100.00 ~ ¥ 110.00
¥100.00
200000千克可售
询价单发送成功～