1/1

供应上海斯米克铜焊丝

已收藏

¥ 550.00

5公斤起订

产品规格

可售数量： 1000公斤

1年

经营年限

所在地区

综合评分

全部产品进入店铺

图文详情

产品属性

. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔点约890。黄铜气焊及碳弧焊用，也可钎焊铜、钢、铸铁

. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔点约880。黄铜气焊及碳弧焊用，也可钎焊铜、钢、铸铁

. Braze welding of copper, steel and cast iron.
熔点约900。铜、钢、铸铁钎焊用

. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔点约905。黄铜气焊及碳弧焊用，也可钎焊铜、钢、铸铁

and high strength. Braze welding of steel, nickel and carbide alloys.
熔点约935。高强度,钎焊钢、镍及硬质合金用

. Gas welding of brass, also braze welding of copper, steel and cast iron.
熔点约900。黄铜气焊用，也可钎焊铜、钢、铸铁

. Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron.
熔点880。黄铜气焊及碳弧焊用，也可钎焊铜、钢、铸铁

, high strength. Braze welding of steel, nickel and hard carbide.
熔点约920。高强度,钎焊钢、镍及硬质合金用

Copper alloys 铜合金	S 201	Sn1 Si0.3Mn0.3 Cu Rem.	Good mechanical properties and crack resistance. Gas welding and argon arc welding of red copper. 机械性能好，抗裂性好。紫铜气焊及氩弧焊用	ERCu
	S 211	Si3 Mn1 Cu Rem.	Good mechanical properties. Argon arc welding of copper alloys and MIG brazing of steel. 机械性能好，铜合金氩弧焊及钢的MIG钎焊用	ERCuSi-Al
	S 212	Sn5 Cu Rem.	Wear resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨性好。铜合金氩弧焊及钢的栈焊用	ERCuSn-A
	S 213	Sn8 Cu Rem.	Wear resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨性好。铜合金氩弧焊及钢的栈焊用	ERCuSn-C
	S 214	Al7.5 Cu Rem.	Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨、耐蚀。铜合金氩弧焊及钢的栈焊用	ERCuAl-A1
	S 215	Al9 Cu Rem.	Wear and corrosion resistance. Argon arc welding of copper alloys and surfacing of steel. 耐磨、耐蚀。铜合金氩弧焊及钢的栈焊用	ERCuAl-A2
	S 221	Cu60 Sn1 Si0.3 Zn Rem.	Melting point is about 890
	S 221F	Cu60 Sn1 Si 0.3 Zn Rem.	S221 welding rod coated with flux. 外涂焊剂的S221焊丝
	S 222	Cu58Sn0.9Si0.1 Fe0.8 Zn Rem.	Melting point is about 880	RBCuZn-C
	S 222F	Cu58Sn0.9Si0.1 Fe0.8 Zn Rem.	S222 welding rod coated with flux. 外涂焊剂的S222焊丝	RBCuZn-C
	S 223	Cu59 Sn0.6 Zn Rem.	Melting point is about 900	RBCuZn-A
	S 224	Cu62 Si0.5 Zn Rem.	Melting point is about 905
Copper alloys 铜合金	S 225	Cu48 Ni10 Zn Rem.	Melting point is about 935	RBCuZn-D
	S 225F	Cu48 Ni10 Zn Rem.	S225 welding rod coated with flux. 外涂焊剂的S225焊丝	RBCuZn-D
	S 226	Cu60 Sn0.3 Si0.2 Zn Rem.	Melting point is about 900
	S 227	Cu58Sn0.9Ni0.5 Si0.1 Fe0.8 Zn Rem.	Melting point is about 880	RBCuZn-B
	S 229	Cu55 Ni6 Mn4 Zn余	Melting point is about 920

品牌斯米克

型号 S 201

焊丝直径 2.5/3.0/3.5/4.0

类型多款供选

材质铜

好货推荐

店铺

已收藏

联系

在线咨询

发现更多好货

... 供应上海斯米克铜焊丝

网站也是有底线的