- 产品
- 详情
- 推荐
收藏
¥ 80000.00
1台起订
产品规格
可售数量: 9999台
我们是自动化设备和铝箔垫片的生产厂家,主要生产制造铝箔封口垫片和以下设备:垫片冲裁入盖机;塞垫机(带点胶);全自动瓶盖入垫机;瓶盖组合机,使传统的手工作业变成全自动机械化作业,使企业保证产品质量提升,生产效率提高的基础上,降低批量产品生产制造成本。
周小霞
地址:福建省厦门市集美区后溪机械工业集中区东岭路32号
自动垫片冲塞入盖机可将垫片冲裁成型,同时塞入瓶盖,既免去人工入盖的污染又极大提高生产效率。本机型广泛适用于包装行业、制药行业、食品行业等。
Automatic cap lining machine can punch the liner to some mode and then finish capping to avoid the manual pollution and improve the product efficiency as well. It is mainly applied to packaging, medicine, food and so on industries.
特点:
1. PLC控制,面板操作,运行稳定、可靠,操作简易,制可连续24小时不间断工作;
2. 自动理盖,自动剔除开口朝下的盖子;
3. 转盘式定位,准确入盖;
4. 冲裁装置,通过更换模具实现不同规格盖子的冲塞入盖。
5. 计数功能、垫片缺料、接头检测功能;
Features:
1. PLC controller, panel operation, stable running and easy operation, 24-hour running available
2. Automatic checking to remove inverted cap
3. Rotary positioning for accurate capping
4. Punching device to achieve different capping by changing mould size or specification
5. Calculation function, liner shortage and tie-in checking function
主要技术参数(标准型):
1. 工作电压:220VAC±10,单相,50/60Hz,总功率:1KW;
2. 工作气压:0.6-0.8MPa,耗气量:300L/min;
3. 窄卷料厚度:0.21.0mm,放料盘适合卷料内径:76mm,外径:500mm;
4. 冲裁速度:090个/分钟(以直径22mm、厚度0.3mm垫片,直径26mm盖子为测试介质,其他情况,实测为准)
5. 本机型适合盖子直径:18-110mm,高度10-25mm范围内订制,特殊尺寸、形状之盖子可选特制机型。
Technique Parameter(standardized):
1. VDD: 220VAC±10, single-phase, 50/60Hz, total power: 1KW
2. MPa: 0.6-0.8MPa, cfm: 300L/min at most;
3. Narrow Volume thickness (mm): 0.2-1.0, plate volume in (mm): 76, out (mm): 500 at most
4. Punching Speed (unit/min): 0-90 (liner with 22mm diameter, 0.3mm thickness and 26mm diameter cap as the testing medium, others according to actual usage)
5. Application for cap diameter (mm): 18-110, height (mm): 10-25. Customized machine is for your special size and form capping.
-
13950159138
-
0592-5567821
垫片自动入盖机
¥ 80000.00
¥80000.00
9999台可售
询价单发送成功~