水电站拦污漂设备 工程塑料拦污漂浮体定制加工

近年来，随着人们对污物影响发电效益重视程度的加深，越来越多的水电站在进水口前沿设置拦污索、拦污装置。实际工程中，枯水期时，拦污索、拦污装置对体积较小、质量较轻的泡沫及塑料制品、生活垃坡、树叶草叶等拦截效果较好，但对树枝、枯木、竹子等拦截效果较为一般；洪水期时，由于水流流速较大、水流条件较为复杂、污物也较多，传统拦污排拦污的效果相对较差，尤其对成簇的竹子、成团的树枝枯木等拦截能力很差。新型拦污索、拦污装置采用自浮式拦污，无需任何动力，河道电站两边岸坡上用水泥打桩，根据当地地理情况，按需求操作。此款方案灵活多变，塑料拦污漂排可随着水势的涨幅而自由升降，节省人力成本。安装结构多元化，可依地势，水流随意变化组合。

In recent years, more and more hydropower stations have set up contamination ropes and contamination intercepting devices in front of intake as people pay more attention to the influence of contamination on power generation efficiency. In practical engineering, the interception of fouling and fouling in foam and plastic products, living slope and foliage grass leaves is better in dry season, but the interception effect is more common for branches, dead wood and bamboo. In flood season, the flow velocity is larger and the flow condition is more complicated. There are also many substances, and the effect of traditional interception and drainage is relatively poor, especially the interception ability of cluster bamboo, cluster branches and dead wood is very poor. The new type of anti-fouling rope and anti-fouling device adopts self-floating anti-fouling without any power. Cement piling is used on both sides of the bank slope of river power station, and the operation is carried out according to the local geographical conditions. This scheme is flexible and flexible. Plastic blocking and bleaching discharges can rise and fall freely with the increase of water potential, saving labor costs. The installation structure is diversified, and the water flow can be changed according to the topography.水电站拦污漂设备 工程塑料拦污漂浮体定制加工