【河北远东泵业电动油脂泵2CG10 硬齿面渣油泵尺寸为0.830.390.35米】价格_批发_厂家_参数_图片_转子泵

1/1

河北远东泵业电动油脂泵2CG10 硬齿面渣油泵尺寸为0.830.390.35米

¥ 1850.00

1件起订

产品规格

规格: 2CG10

河北远东泵业制造有限公司

采通通 7 年资质认证实名企业

23年

经营年限

河北沧州

所在地区

10.0

综合评分

全部产品进入店铺

图文详情

产品属性

河北远东泵业电动油脂泵2CG10 硬齿面渣油泵尺寸为0.83*0.39*0.35米

●2CG渣油泵用途2 CG low residue oil pump USES

　　用于渣油、、落地油、泡沫原料及添加剂等介质的输送、加压、是玻璃、泡沫、建材、化工建筑、石油、粮油行业理想的输送加压设备。Used for residual oil, foam raw materials and additives, such as the medium of conveying, pressure, is glass, foam, building materials, chemical construction, petroleum, grain and oil industry ideal conveying pressure equipment.

●2CG渣油泵应用范围2CG slag pump application range

主要用于输送各种润滑性差、含有细微颗粒的介质、温度不超过200℃，粘度不大于1500cst。Mainly used for conveying various poor lubricity, medium containing fine particulates, temperature does not exceed 200℃, the viscosity is not more than 1500 CST.

●2CG渣油泵结构特点2CG low residue oil pump structure characteristics

1、主要由泵体、泵盖、齿轮、轴、轴承、及密封等部件构成。1, mainly composed of pump body, pump cover, gear, shaft, bearing and seal components.

2、三体为铸铁件、铸钢件；齿轮、轴采用特殊钢材，其表面硬度可达到HRC60以上，具有极强的耐磨性。2, three body is cast iron pieces, steel;Gear, shaft, the use of special steel, the surface hardness can reach above HRC60, with strong wear resistance.

电动油脂泵2CG10硬齿面渣油泵尺寸为0.83*0.39*0.35米

2CG齿轮油泵系列产品性能参数表

型号 Model	流量Flow Capacity		压力Mpa	吸入高度m	口径 mm	电机功率 kw
型号 Model	m³/h	L/min	压力Mpa	吸入高度m	口径 mm	电机功率 kw
2CG-1	1	16.7	1.0 /1.6	5	Φ25	1.5
2CG-1.5	1.5	25	1.0/1.6	5	Φ25	1.5/2.2
2CG-2	2	33.3	1.0/1.6	5	Φ25	2.2/3
2CG-3	3	50	1.0/1.6	5	Φ25	3
2CG-5	5	83.3	1.0/1.6	5	Φ40	4
2CG-6	6	100	1.0/1.6	5	Φ40	4
2CG-7.5	7.5	125	1.0/1.6	5	Φ50	5.5
2CG-10	10	167	1.0/1.6	5	Φ50	5.5/7.5
2CG-12	12	200	1.0/1.6	5	Φ55	5.5/7.5
2CG-15	15	250	1.0/1.6	5	Φ55	7.5 /11
2CG-18	18	300	1.0/1.6	5	Φ55	7.5/11
2CG-18	18	300	1.0	4.5	Φ70	7.5
2CG-29	29	483.3	1.0	4.5	Φ70	11
2CG-38	38	633	1.0	4	Φ100	22
2CG-58	58	960	1.0	3.5	Φ100	30
2CG-72	72	1200	0.6	4	Φ150	37
2CG-96	96	1600	0.6	4	Φ150	45
2CG-112	112	1800	0.6	2.5	Φ200	55
2CG-150	150	2500	0.6	2.5	Φ200	75