江苏春晨电缆有限公司生产JGG高压GXJ电机引接线，JGG高压GXJ电机引接线，

所有导线连接好后，均应用绝缘带包扎，以保证绝缘性能。

After all wires are connected, insulating tapes are applied to ensure insulation performance.

在橡皮导线的接头上缠绕绝缘带时，应线用橡胶带或黄蜡布带紧缠绕两层，然后用黑胶布带缠绕两层。缠绕时采用斜叠法，使没圈压叠胶带宽度的一般。第一层绕好后，再另一斜叠方向缠绕第二层，绝缘层的缠绕厚度应与原有橡皮绝缘层一样厚。

When winding insulating tape on the joint of rubber wire, two layers should be tightly wound with rubber tape or yellow wax tape, and then two layers should be wound with black tape. When winding, the oblique stacking method is used to make the overlapping bandwidth of uncoiled rubber generally. After winding the first layer, the second layer is wound in another inclined direction. The winding thickness of the insulation layer should be the same as that of the original rubber insulation layer.

包缠绝缘带要用力拉紧，包卷要粘接密实，以免潮气侵入。

The wrapped insulating tape should be tightened and the wrapped tape should be bonded tightly so as to avoid moisture intrusion.