- 产品
- 详情
- 推荐
收藏
¥1888.00
1-9个
¥1566.00
≥10个
产品规格
规格: DN25
不锈钢气体减压阀属于先导活塞式减压阀。由主阀和导阀两部分组成。主阀主要由阀座、主阀盘、活塞、弹簧等零件组成。导阀主要由阀座、阀瓣、膜片、弹簧、调节弹簧等零件组成。通过调节调节弹簧压力设定出口压力、利用膜片传感出口压力变化,通过导阀启闭驱动活塞调节主阀节流部位过流面积的大小,实现减压稳压功能。主要用于气体管路,除了氮气外,还可用于如空气、氧气、 、液化气、 等气体。
Stainless steel gas valve outlet pressure set by the adjusting spring pressure, the use of the diaphragm sensing changes in outlet pressure, so as to adjust the main throttle valve parts to the size of the flow area through the pilot valve to open and close the drive piston, to achieve reduced pressure regulator function. Mainly used in the gas line can also be used, in addition to nitrogen, such as air, oxygen, hydrogen, liquefied petroleum gas, natural gas and other gases.
一、不锈钢气体减压阀主要技术参数和性能指标
公称压力(Mpa) | 1.6 | 2.5 | 4.0 | 6.4 | 10.0 | 16.0 |
壳体试验压力(Mpa)* | 2.4 | 3.75 | 6.0 | 9.6 | 15.0 | 24 |
密封试验压力(Mpa) | 1.6 | 2.5 | 4.0 | 6.4 | 10.0 | 16.0 |
高进口压力(Mpa) | 1.6 | 2.5 | 4.0 | 6.4 | 10.0 | 16.0 |
出口压力范围(Mpa) | 0.1-1.0 | 0.1-1.6 | 0.1-2.5 | 0.5-3.5 | 0.5-3.5 | 0.5-4.5 |
小压差(Mpa) | 0.15 | 0.15 | 0.2 | 0.4 | 0.8 | 1.0 |
渗漏量 | X/F(聚四氟乙稀/橡胶):O Y(硬密封):GB12245-1989 |
*:壳体试验不包括膜片、顶盖
二、不锈钢气体减压阀流量系数(Cv)
DN | 15 | 20 | 25 | 32 | 40 | 50 | 65 | 80 | 100 | 125 | 150 | 200 | 250 | 300 | 350 | 400 | 500 |
Cv | 1 | 2.5 | 4 | 6.5 | 9 | 16 | 25 | 36 | 64 | 100 | 140 | 250 | 400 | 570 | 780 | 1020 | 1500 |
三、不锈钢气体减压阀主要零件材料
零件名称 | 零件材料 |
阀体 阀盖 底盖 | 304、316 |
阀座 阀盘 | 2Cr13/304* |
缸套 | 2Cr13/25(镀硬铬)/304* |
活塞 | 2Cr13/铜合金/铜合金* |
活塞环 | 合金铸铁/对位聚苯* |
导阀座 导阀杆 | 2Cr13/304* |
膜片 | 1Cr18Ni9Ti |
主阀 导阀弹簧 | 50CrVA |
调节弹簧 | 60Si2Mn |
密封垫(X/F型号) | 橡胶/聚四氟乙稀 |
导阀体 导阀盖 | 25/304* |
-
13760336133
-
0755-29172950
获得业主推荐进口不锈钢气体减压阀德国力特LIT型号参数价格
¥ 1566.00 ~ ¥ 1888.00
¥ 1566.00
8888个可售
询价单发送成功~