- 产品
- 详情
- 推荐
收藏
¥0.13
5000-9999件
¥0.11
≥10000件
产品规格
规格: 不锈钢 碳钢 铝
双面胶保温钉的英文简介
Insulation Pin, Fastening for Insulation Can Be either Welded or Non-welded Configurations
· Base size: 25 x 25mm/35 x 35mm/40 x 40mm/45 x 45mm/50 x 50mm all are standard
· Diameter: 1.70mm for 25 x 25mm base; 2.67mm and 3.00mm for both 35mm or 50mm base are standard. Other sizes available by special order only.
· Length: 20mm to 150 mm are standard. Other lengths available by special order.
· Material:1.70mm pin is aluminum; 2.67mm and 3.00mm pin are low carbon steel. Also available by special order in all stainless steel or all aluminum
· Plating: galvanized costing is standard. yellow, white and blue gal are available
· Washers: self-locking washers are available in a variety of sizes, shapes and materials
· Recommended assembly method:
o Operation at ambient temperatures between 15 and 25 degrees Celsius
o Work surfaces should be clean and dry, free of dust, grease, oil and any other loose matter
o Remove the protective release paper taking care not to touch the adhesive
o Place the hanger in the required position and press the base against the surface to be insulated
o Insulation can be impaled immediately and firmly locked with fastening clips but maximum strength of adherence is achieved after 24 hours
Insulation Nails:
Base size:
1"x1" & 2"x 2" & 1 3/8"x1 3/8";
Pin dia.:1.70mm & 2.67mm & 3.0mm;
Self-adhesive & non-adhesive
Insulation Pins Features:
1) Available material: Aluminum or steel
2) Use: exclusively used for fixing adiabatic materials in ducts of
air-conditioner, for glass-wool and rock-wool in soundproofing works,
and for the duct-lining
3) Self-adhesive type and non-stick type
4) Size: base 25mm / 50mm; pin dia.: 1.70mm/2.70mm/3.00mm
Self Adhesive pins
BASE SIZE:
25x25mm /35x35mm /40x40mm /45x45mm /50x50mm all are standard
不干胶保温钉自粘保温钉不锈钢保温钉空调管道保温钉
¥ 0.11 ~ ¥ 0.13
¥ 0.11
500000件可售
¥ 0.11
500000件可售
¥ 0.11
500000件可售
询价单发送成功～