【大西洋铜合金焊条铜合金焊条现货直销】价格_批发_厂家_参数_图片_焊条

1/1

大西洋铜合金焊条铜合金焊条现货直销

¥75.00

10-99公斤

¥73.00

≥100公斤

产品规格

可售数量： 1000000公斤

河北贝达焊接材料有限公司

采通通 5 年资质认证实名企业

6年

经营年限

河北邢台

所在地区

10.0

综合评分

全部产品进入店铺

图文详情

产品属性

ECuAl铜焊条Cu 237铜焊条ECuAl-A2铜合金焊条

Category 类别	Trade- Mark 牌号	Equivalent to China Standard 相当国标	Characteristics & application 特性和用途	Equivalent to AWS 相当AWS
Hard-surfacing 硬面栈焊	D 667	EDZCr-B-15	HRc48. Resistance to wear, gas corrosion and oxidation. Hardfacing of blast furnace hopper and cracker part. HRc48，耐磨、耐气蚀、抗氧化。栈焊高炉料钟、破碎机件
	D 802	EDCoCr-A-03	HRc38-47. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as the edge of thermo-cutter. HRc38-47，耐热、耐蚀、耐磨。栈焊高温工件如热剪切刀刃	ECoCr-A
	D 812	EDCoCr-B-03	HRc45-50. Resistance to heat, wear and corrosion. Hardfacing of high temperature part such as internal-combustion engine valve. HRc45-50，耐热、耐蚀、耐磨。栈焊高温工件如内燃机阀	ECoCr-B
	D 822		HRc53. Resistance to Wear and heat, bad shock resistance. Hardfacing of rotating blade wheel of boiler. HRc53，耐热、耐磨，但抗冲击性差。栈焊锅炉旋转叶轮
	D 832	EDCoCr-C-03	HRc50. Wear and heat resistance. Hardfacing of high temperature part such as hot-rolling guided way. HRc50，耐热、耐磨。栈焊高温工件如热轧导轨	ECoCr-C
	D 842	EDCoCr-D-03	HRc28-38. Corrosion and thermo-fatigue resistance, work harding. Hardfacing of hot forging die. HRc28-38，耐蚀、抗热疲劳，具有加工硬化性。栈焊热锻模
Cast iron 铸铁	Z 308	EZNi	Pure nickel, excellent general properties. Used to weld thin cast iron part and repair welding machined surface, such as guided way of machine tool. 纯镍，综合性能好。铸铁薄件及加工面补焊用，如机床导卫	ENi-Cl
	Z 408	EZNiFe	Iron nickel, high strength and excellent ductility. Repair welding of important gray cast iron and nodular cast iron, such as cylinder cap. 镍铁，强度高、塑性好。重要灰铸铁及球铁焊补用，如汽缸盖	ENiFe-Cl
	Z 508	EZNiCu-1	Copper nickel, good machinability and bad crack resistance. Repair welding of sand hole and gray cast iron machined surface subject to no load. 镍铜，易加工，但抗裂性较差。不受力的灰铸铁加工面及砂眼补焊	ENiCu-B
Copper alloys 铜合金	Cu 107	ECu	Red copper, atmosphere and sea water corrosion and excellent electric conductivity. Welding of red copper such as electrical copper row. 紫铜，耐大气，海水腐蚀，导电性好。紫铜焊接用，如导电铜排	ECu
	Cu 207	ECuSi	Silicon bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass. 硅青铜，耐蚀、强度高。铜、硅青铜及黄铜焊接用	ECuSi
	Cu 227	ECuSnB	Tin phosphor bronze, corrosion resistance and high strength. Welding of copper, silicon bronze and brass. 锡磷青铜，耐蚀、强度高。铜、硅青铜及黄铜焊接用	ECuSn-C
	Cu 237	ECuAl	Aluminum bronze, wear and corrosion and high strength. Welding or surfacing of copper alloys. 铝青铜，耐磨、耐蚀，强度高。铜合金焊接或栈焊用	ECuAl-A2
Aluminum alloys 铝合金	Al 109	TAl	Pure aluminum, excellent corrosion resistance and middle strength. Welding of pure aluminum. 纯铝，耐蚀性好，但强度不高，纯铝焊接用	E1100
	Al 209	TAlSi	Silicon aluminum, good crack resistance and wide range of usage. Welding of aluminum alloys other than aluminum magnesium alloys. 铝硅，抗裂性好，通用性大。铝合金焊接用，不宜焊接铝镁合金	E4043
	Al 309	TAMn	Manganese aluminum, corrosion resistance and high strength. Welding of aluminum alloys. 铝锰，强度高，耐蚀。铝合金焊接用	E3003
Nickel alloys 镍合金	Ni 102	ENi-1	Pure nickel. Welding and surfacing of nickel and nickel to steel. 纯镍，用于镍、镍与钢的焊接与栈焊	ENi-1
Nickel alloys 镍合金	Ni 207	ENiCu-7	Copper nickel. Welding and surfacing of copper nickel and copper nickel to steel. 镍铜，用于镍铜、镍铜与钢的焊接与栈焊

银焊条成分及用途　　

   HL301 Ag 10 Cu 53 Zn余量主要用于钢及钢合金，钢及硬质合金。
   HL302 Ag 25 Cu 45 Zn余量主要用于钢合金，钢及不锈钢，都有良好的耐腐蚀性和导电性能。
   HL303 Ag 45 Cu 30 Zn余量熔点较低，有良好的侵流性和填满间隔能力，焊缝光洁，耐冲击性好。用于铜合金，钢及不锈钢。
   HL304 Ag 50 Cu34 Zn余量主要性能和HL303银基焊条基本相同。

   HL306 Ag 65 Cu 20 Zn余量主要用于铜及铜合金钢，不锈钢，等电气设备。
   HL307 Ag 75 Cu 26 Zn余量主要用于制造电子管，真空容器件及电子原件，食品器皿，仪表，波导和电气设备等多用途，适合铜及镍设备。
   HL308 Ag 72 Cu 22 Zn 余量主要用于制造电子管，真空容器件及电子原件，等多用途，适合铜及镍设备。
   HL312 Ag40.Cu.Zn.Cd 钎焊铜及铜合金、钢及不锈钢等
   HL313 Ag50.Cu.Zn.Cd 钎焊铜及铜合金、钢及不锈钢等
   HL321 Ag56.Cu.Zn.Sn 钎焊铜及铜合金、钢及不锈钢等
   HL323 Ag30.Cu.Zn.Sn 钎焊铜及铜合金、钢及不锈钢等
   HL325 Ag45.Cu.Zn.Sn 钎焊铜及铜合金、钢及不锈钢等
   HL326 Ag38.Cu.Zn.Sn 钎焊铜及铜合金、钢及不锈钢等

ERCuSn-A铜合金焊条 ERCuSn-A铜焊条斯米克

S 221	Cu60 Sn1 Si0.3 Zn Rem.	Melting point is about 890 . Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. 熔点约890。黄铜气焊及碳弧焊用，也可钎焊铜、钢、铸铁
S 221F	Cu60 Sn1 Si 0.3 Zn Rem.	S221 welding rod coated with flux. 外涂焊剂的S221焊丝
S 222	Cu58Sn0.9Si0.1 Fe0.8 Zn Rem.	Melting point is about 880 . Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. 熔点约880。黄铜气焊及碳弧焊用，也可钎焊铜、钢、铸铁	RBCuZn-C
S 222F	Cu58Sn0.9Si0.1 Fe0.8 Zn Rem.	S222 welding rod coated with flux. 外涂焊剂的S222焊丝	RBCuZn-C
S 223	Cu59 Sn0.6 Zn Rem.	Melting point is about 900 . Braze welding of copper, steel and cast iron. 熔点约900。铜、钢、铸铁钎焊用	RBCuZn-A
S 224	Cu62 Si0.5 Zn Rem.	Melting point is about 905 . Gas welding and carbon arc welding of brass, also braze welding of copper, steel and cast iron. 熔点约905。黄铜气焊及碳弧焊用，也可钎焊铜、钢、铸铁