- 产品
- 详情
- 推荐
收藏
¥ 200.00
1个起订
产品规格
可售数量： 1000个
70×70×20砂浆粘结强度成型试模用于新型外墙保温材料试验的砂浆试模制备。符合建筑砂浆基本性能试验方法标准 《建筑砂浆基本性能试验方法标准》 建筑砂浆基本性能试验方法标准 (JGJ/T 70-2009) 标准10拉伸强度试验。
Mortar bond strength forming test mode is used for mortar test preparation of new exterior wall insulation material test. It meets the test method standard for basic performance of building mortar. The Standard Test Method for Basic Performance of Building Mortar. The Standard Test Method for Basic Performance of Building Mortar (JGJ/T 70-2009) Standard 10 Tensile Strength Test.
70×70×20砂浆粘结强度成型试模由上海荣计达仪器科技有限公司提供，设备质保期一年，一年内产品如有质量问题，供方负责免费维修。如果因操作不当或者人为损坏，我公司亦应提供维修、更换服务，由此产生的费用由需方承担。
Mortar bond strength forming test mode is provided by Shanghai Rongjiida Instrument Technology Co., Ltd. The equipment warranty period is one year. If the product has quality problems within one year, the supplier is responsible for free maintenance. If the operation is improper or man-made damage, our company shall also provide repair and replacement services, and the expenses incurred shall be borne by the purchaser.
70×70×20砂浆粘结强度成型试模：
规格：70×70×20
材质：铸钢。
Mortar bond strength forming test mode:
Specification: 70*70*20
Material: cast steel.
70×70×20砂浆粘结强度成型试模使用：
装模时应注意端板与隔板的下平面与底座上平面必须靠紧，不得挠起，必要时可以在压紧模型的同时，用木锤轻击各板的上平面，使与底座贴紧。
70*70*20 mortar bond strength molding test mode use:
When installing the mold, it should be noted that the lower plane of the end plate and the partition must be close to the upper plane of the base, and should not be slanted. If necessary, the upper surface of each plate can be tapped with a wooden hammer while pressing the model to make it adhere to the base. tight.
-
13761118616
-
021-61997300
荣计达70×70×20砂浆粘结强度成型试模 砂浆保温试模
¥ 200.00
¥200.00
1000个可售
询价单发送成功～