- 产品
- 详情
- 推荐
收藏
¥ 200.00万
1台起订
产品规格
可售数量: 30台
本系列产品适用于汽车、航空航天、家电、行业热固性、热塑性塑料制品成型。
复合材料种类多,目前市场上液压机成型中广泛应用的复合材料有玻璃纤维、炭纤维、玄武岩纤维等主导材料。
液压机在产品工艺中主要承担模压成型工艺,利用各异型的模具,通过高压与热固成型。根据模具与产品配方不同,制造出各种形状、各种颜色、各种强度的复合材料产品。
主要用于热固性(玻璃钢)塑料制品、热塑性制品的整体模压成型,适用于SMC、BMC、DMC、GMT等各种团材及片材的模压成形;
It is mainly used for the integral forming of thermosetting (FRP) plastics and thermoplastic products. Suitable for the forming of SMC, BMC, DMC, GMT and other bulks and sheets.
八面式导向结构,加大导向面积,抗篇载能力强;
Eight sides guiding structure, enlarge guiding area, greatly improved incline load proof capacity.
多缸均布结构,横梁加高式设计,模压成型稳定性更强;
Uniform distribution of multiple cylinders, design of Cross Beam Heightening, making the forming process more stable.
液压系统安装在机顶上,配维修平台,环保,噪音低,维保方便;
Hydraulic system is installed on the roof with maintenance platform, environmentally friendly, low noise and easy maintenance.
≥500mm/s速度快速合模,可分多段速度慢速加压成型,合理预留排气时间;
Shutting mold speed more than 500mm/s, multiple-stage slow speed pressure forming, reasonable reserved exhaust time。
高压慢开模功能,适用于较高的产品;
With the function of high pressure slow opening mold, suitable for high products.
伺服系统快速响应,全数字化控制,油泵功率节能40%-80%;
Quick response of system, numerical control system, the energy saving rate of oil pump can reach 40%-80%.
微电脑闭环加热控制系统,温控可达±2℃,模具加热节电10%以上;
Microcomputer closed-loop heating control system, temperature control can reach ±2℃, mold heating energy saving more than 10%.
可选:废气净化系统,换模小车,远程售后服务系统,双闭环伺服系统;
Optional accessories: waste gas purification system, mold change car, remote after-sale service system, double closed loop servo system.
采用双闭环伺服系统压力控制精度可达±0.05Mpa,位置控制精度可达±0.01mm;
-
18123256616
-
028-67999199
成都正西液压机工厂供应按需订制四柱液压机复合材料液压机
¥ 200.00万
¥200.00万
30台可售
询价单发送成功~