- 产品
- 详情
- 推荐
已收藏
¥ 88000.00 ~ ¥ 11.50万
1台起订
产品规格
规格: 1400 1600 1800 2000 2200
360单面机 吸附式单面瓦楞机 恒创利 瓦楞生产线 使用年限久
【温馨提示】产品相关型号过多,网站中标识的价格以及参数仅作参考,具体价格以来电咨询为准,欢迎新老客户来公司考察面谈!!
1、※SF-320E multi-cassette negative pressure single facer
SF-320E 抽屉式单面瓦楞机
ⅰ、Structural features结构特点:
★design speed:180m/min 设计速度:150m/min
★effective width:1800mm 有效幅宽:1800mm
★main corrugated roller:¢320mm(According flute differ),pressure roller¢370mm,preheat roller¢400mm。主瓦楞辊:¢320mm(根据楞型不同而有所不同),压力辊¢370mm,预热辊¢400mm
★using negative pressure type design, low heat loss,helps the core paper to press evenly and close to the surface of corrugated roller, make the corrugate molding better, pressure uniform, the top of corrugate can glue uniform and better, make the single corrugated paper have perfect laminating.采用负压式设计,热量损耗低,使芯纸能均匀受压并贴附于瓦楞辊表面,使瓦楞更好的成型,因为压力均匀,瓦楞顶端能更好的,均匀地涂上胶水,使单面瓦楞纸贴合情况更好。
★quickly change rollers in 10 minutes, while change corrugated roller with the electric trolley loading,the entire group of corrugating with motor drive,put into the machie,fixed to the machine base,only need a buttons can complete the replacement quickly and easily.
快速换辊10分钟,更换瓦楞辊时以台车拖载,将整组瓦楞辊送入机器内,固定于机器底座上,只需一 个按钮开关即可快速完成瓦楞辊更换。
★corrugated roll adopt 48CrMo high quality alloy steel,dealing with heating, after grinding tungsten carbide surface treatment。
瓦楞辊采用48CrMo优 金钢,经热处理,表面经研磨后碳化钨处理,表面硬度HV1200度以上。
★corrugated roll and pressure roll adopt the airbag control system with high stability, at the same time with pneumatic control buffer effect。
瓦楞辊、压力辊等采用了具有高稳定性的气囊控制系统,同时具有气压控制缓冲效果。
★Glue volume control with electric adjustment,rubber septum electric device,the glue system can operate independently when the motor stops,prevent glue exhausted。
上胶量控制采用电动调整,隔胶装置电动,涂胶系统在主机停止时可独立运转,防止胶水枯竭。
★the moveable type glue unit is convenient to clean and maintain.
移动式的上胶系统,除清洗方便外,更有利于保养,维修工作。
★easy operation control system, touch screen operation interface,Drawing with color display operating status, function selection, fault indication, and parameter settings, etc. can exclude exhibit this machine fully functional, easy to operate, user-friendly.简单的操作控制系统,触摸屏操作界面,配合彩色图面显示操作状态、功能选择、故障指示、排除及参数设定等均可表现出此机器功能齐全、操作简便、人性化。
★built-in pre-conditioner with proportional spraying device, adjustment the core paper temperature and moisture.内置预调器带喷雾系统,调节芯纸温度和水份。
★main, vice corrugating and pressure roller bearings are used in high-temperature grease to ensure bearing life running smoothly。
主、副瓦楞辊及压力辊轴承均采用高温润滑脂,以确保轴承寿命、运转顺畅。
ⅱ、Technical parameter技术参数:
★effective width:1800mm 工作幅宽:1800mm
★operation direction:left or right(Determined in accordance with the customer's facility)
操作方向:左置或右置(根据客户厂房确定)
★design speed:150m/min 设计速度:150m/min
★temperature range:160—200℃ 温度范围:160—200℃
★air source:0.4—0.9Mpa 气 源:0.4—0.9MPa
★steam pressure:0.8—1.3Mpa 蒸汽压力:0.8—1.3MPa
★corrugated flute:(UV type or UVV type)瓦楞楞型(UV型或UVV型)
※roller diameter parameters:
★diameter of up corrugated roller: ¢320mm 上瓦楞辊直径: ¢320mm
★diameter of pressure roller:¢370m 压力辊直径:¢370mm
★diameter of glue roller:¢269mm 涂胶辊直径:¢269mm
★diameter fixed paste roll :¢153mm 定糊辊直径:¢153mm
★diameter of preheater:¢400mm 预热器直径:¢400mm
※powered motor parameters:
★main frequency drive motor:30KW 主变频驱动电机:22KW
★suction motor:15KW 吸风电机:11KW
★glue reducer linear actuator:100W 调胶减速机:100W
★glue gap motor:200W*2 调胶调整电机:200W *2
★glue pump motor: 2.2KW 胶泵电机: 2.2KW
★glue frequency motor:3.7KW 涂胶部电机: 3.7KW
360单面机 吸附式单面瓦楞机 恒创利 瓦楞生产线 使用年限久
¥ 88000.00 ~ ¥ 11.50万
¥ 88000.00
88000台可售
¥ 90000.00
90000台可售
¥ 90000.00
90000台可售
¥ 95000.00
95000台可售
¥ 11.50万
110000台可售
询价单发送成功~