【水上塑料管浮体疏浚工程绞吸船配套输运管道浮筒厂家】价格_批发_厂家_参数_图片_滚塑容器

1/1

水上塑料管浮体疏浚工程绞吸船配套输运管道浮筒厂家

¥428.00

10-199套

¥420.00

≥200套

产品规格

可售数量： 999套

宁波柏泰塑料科技有限公司

采通通 6 年资质认证实名企业

14年

经营年限

浙江宁波

所在地区

9.5

综合评分

全部产品进入店铺

图文详情

产品属性

水上塑料管浮体疏浚工程绞吸船配套输运管道浮筒厂家

海洋、江湖等挖沙、抽沙疏浚输送管道在水上敷设时，往往面临管道本身或者管道内部输送物质重量较大而沉入水中的问题。此时，一种产品应运而生，那就是——中密度聚乙烯浮体。

The whole pipeline is divided into two parts, one is using for surface and the other is using for shore. The main raw materials for these two hoses are high abrasion and corrosion resistant rubber, and a cord reinforcement layer and a steel wire skeleton layer are added inside the pipe wall to ensure the pressure resistance and tear resistance of the hose. The hose connection method is a vulcanized flange connection, that is, the flange and the hose are integrated, and there is no need to worry about the flange falling off.

Floating sand suction hose used on the surface of the water. This type of hose is required to float on the surface of the water. Since the drop of the pit is relatively large (100 m) and the distance of the conveyance is relatively long, the hose of this part must have a high pressure resistance. According to the calculation, the design pressure is 25 kg/ cm2. It is important to consider that the pontoon will move up and down with the rise and fall of the water level and the waves will cause lateral displacement. The internal structure is the same as the sand suction hose used offshore (described as below). The difference is that a floating body is added to the outside of the hose.