【铁基合金粉 F302铁合金粉末 Fe50铁基粉末】价格_批发_厂家_参数_图片_铁粉系列

1/1

铁基合金粉 F302铁合金粉末 Fe50铁基粉末

¥155.00

5-49千克

¥153.00

≥50千克

产品规格

可售数量： 10057千克

河北贝达焊接材料有限公司

采通通 5 年资质认证实名企业

6年

经营年限

河北邢台

所在地区

10.0

综合评分

全部产品进入店铺

图文详情

产品属性

喷焊合金粉末均采用塑料桶和铁桶封装但由于粉末粒度细，易于吸潮，建议用户在使用前采用120℃保温两小时低温烘烤后使用。

型号	规格(μm)	特性简述	主要用途	物理性能	应用工艺
贝达Ni15	-106/+45 　　-90/+25	熔点低、自熔性好，具有优良耐磨、耐热和抗氧化性能。	玻璃模具，塑料模铸铁，机床导轨修复和予保护	①HB 　　②熔点1080℃ 　　③流动性16s/50g 　　④松装密度4.7g/cm3	氧乙炔一、二步法喷焊工艺。
贝达Ni25A	-106/+45 　　-90/+25 　　-45/+15	熔点低、自熔性优良，焊层具有耐磨、耐蚀、抗氧化性能。	用于小能多冲击的玻璃模具、平板、滑轨、齿轮面修复和予保护。	①HRC22/26 　　②熔点1050℃ 　　③流动性15s/50g 　　④松装密度4.7g/cm3	氧乙炔一、二步法工艺;超音速喷涂。
贝达Ni25AA	-90/+25 　　-73/+45	熔点极低湿润性好，焊层具有综合性能优。	用于玻璃模具止口修复和予保护	①HRC21-24 　　②熔点850℃/900℃ 　　③流动性16s/50g 　　④松装密度4.6g/cm3	氧乙炔一、步法喷焊工艺。
贝达Ni45A	-73/+45 　　-106/+45	熔点低、自熔性优良，焊层具有耐磨、耐热、耐腐蚀、抗氧化性能。	用于玻璃模具冲头予保护焊层	①HRC42-48 　　②熔点1080℃ 　　③流动性16s/50g 　　④松装密度4.6g/cm3	氧乙炔一、二步法喷焊工艺。
贝达Ni45Q	-106/+45 　　-150/+53 　　-75/+15	熔点低、自熔性好，焊层具有耐磨、抗氧化、抗硝腐蚀性好。	用于气门进排气阀，耐泵轴予保护涂层.	①HRC43-47 　　②熔点1070℃ 　　③流动性16s/50g 　　④松装密度4.7g/cm3	等离子堆焊　　氧乙炔喷焊　　炉熔工艺
贝达Ni55AA	-106/+45 　　-150/+53	熔点低、自熔性好，焊层具有良好耐磨、耐热、抗氧化性能。	泵柱塞、拔丝轮等机械零件予保护焊层。	①HRC50-57 　　②熔点1040℃ 　　③流动性17s/50g 　　④松装密度4.6g/cm3	等离子堆焊　　氧乙炔喷焊
贝达Ni60	-106/+45 　　-150/+53	熔点低、自熔性好，焊层具有优良耐磨性、耐热、抗氧化性。	泵柱塞、风机叶片、拔丝轮、输送辊等予保护焊层。	①HRC59-63 　　②熔点1040℃ 　　③流动性16s/50g 　　④松装密度4.6g/cm3	等离子堆焊　　氧乙炔喷焊

自熔性、润湿性和喷焊性优良，喷焊层具有硬度高、耐蚀、耐磨、耐热特点，难以切削，以湿式磨削为宜。

Category

类别

	Trade- mark 牌号	Chemical composition 化学成份(%)	Hardness 硬度	Application 用途
Oxy- Acetylene Flame spray- using 氧乙炔焰喷焊	贝达F103	Cr10 B1.5 Si3 Ni Rem.	HRc 25	Spray-fusing of cast iron parts, such as die for glass, cylinder, and guide. 铸铁件的喷焊，如玻璃模具，汽缸、导轨
	贝达F101	Cr10 B2.5 Si3 Ni Rem.	HRc 45	Spray-fusing of parts resistance to wear and corrosion, such as valve, the rotator and piston of pump. 耐磨、耐蚀件的喷焊，如阀门、泵转子、泵柱塞
	贝达F101Fe	Cr10 B2.5 Si3 Fe10 Ni Rem.	HRc 45	Spray-fusing of corrosion-resistant parts, such as axle and stigma. 耐磨件的喷焊，如轴类、汽门
	贝达F102	Cr16 B4 Si4 Ni Rem.	HRc 60	Spray-fusing of parts resistance to wear, corrosion and high temperature oxidation, such as die and piston. 耐磨、耐蚀、抗高温氧化工件的喷焊，如模具、柱塞
	贝达F102Fe	Cr16 B4 Si4 Fe15 Ni Rem.	HRc 60	Spray-fusing of corrosion-resistant parts, such as axle and cold die. 耐磨件的喷焊，如轴类、冷模具
	贝达F105	F102+50%WC	HRc 60	Spray-fusing of parts resistance to grain-wear , such as guide plate, scraper and blade of fan. 抗磨粒磨损场合的喷焊，如导板、刮板、风机叶片
	贝达F105Fe	F102Fe+35%WC	HRc 60	Spray-fusing of parts resistance to grain-wear, such as guide plate, scraper and blade of fan. 抗磨粒磨损场合的喷焊，如导板、刮板、风机叶片
	贝达F108	F102+80%WC	HRc 60	Spray-fusing of parts resistance to strong grain-wear and free machining, such as harrow teeth of dredger. 抗强烈磨粒磨损，无需加工场合的喷焊，如挖泥船耙齿
	贝达F301	Cr5 B4 Si4 Ni30 Fe Rem.	HRc 45	Spray-fusing of vulnerable parts of agricultural machinery and mining machinery, such as gear and axletree. 农机,矿山机械易损件的喷焊，如齿轮，车轴
	Track iron powder 轨铁粉	Cr5 B1.5 Si3 Ni30 Fe Rem.	HRc 28	Repair spray-fusing of defects such as scratch and concavity of railroad track. 铁路钢轨擦伤、低塌等缺陷的修复喷焊
Oxy-acetylene flame spraying 氧乙炔焰喷涂	贝达F111	Cr5 B1.5 Si3 Ni30 Fe Rem.	HB 150	Spraying of bearing and cutting parts etc. 轴承、切削件等的喷涂
	贝达F113	Cr10 B1.5 Si3 Ni Rem.	HB 250	Spray-fusing or spraying, such as roll, piston and axle of wear and corrosion resistance. 喷涂亦可喷焊，如滚筒、柱塞、耐蚀耐磨轴等
	贝达F313	Cr15 B1.5 Fe Rem.	HB 250	Spraying of dryer of papermaking and axle. 造纸烘缸、轴类的喷涂
	贝达F314	Cr18 Ni9 B1.5 Fe Rem.	HB 250	Spraying of axle. 轴类喷涂
	贝达F412	Sn10 P0.3 Cu Rem.	HB 80	Spraying of axle and bearing. 轴、轴承的喷涂
	贝达F512	复合Al5Ni95		Backing spray of transition layer between base and working layer. 喷涂层的基体与工作层之间过渡（打底）层用喷涂
PTA hardfacing 等离子弧喷焊	贝达F221	Cr26 W5 B0.7 Co Rem.	HRc 43	PTA hardfacing of sealing surface of high temperature and high pressure valve and the edge of hot shearing tool. 高温高压阀门密封面、热剪切刃口的等离子喷焊
	贝达F223	Cr21 W5 B1.5 Co Rem.	HRc 40	PTA hardfacing of parts resistance to wear and corrosion at high temperature, such as valve under high temperature and high pressure, and blower. 高温下耐磨耐蚀件的喷焊，如高温高压阀门、鼓风机
	贝达F321	Cr13 B1.5 Si1 Fe Rem.	HRc 45	PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as stop-plate etc. 中温中压阀门的闸板及其他耐磨件的等离子喷焊
	贝达F322	Cr23 Ni13 Si5 B1 Fe Rem.	HRc 40	PTA hardfacing of corrosion-resistant parts under mid-temperature and mid-pressure, such as valve base etc. 中温中压阀门的阀座及其他耐磨件的等离子喷焊
	贝达F422	Sn10 P0.3 Cu Rem.	HB 80	PTA hardfacing of axle and bearing etc. 轴、轴承等离子喷焊