一、进口超高温电磁阀产品概述：

德国《LOCKE》洛克--进口超高温电磁阀(High temperature solenoid valve)，是指阀体以及密封采用耐高温的材料，采用耐温线圈、不易烧毁、精密铸造、外观精美的电磁阀，适用于中高温热水、导热油、高温蒸汽、饱和蒸汽及过热蒸汽等管路的自动控制,广泛应用于医疗器械、服装设备、石油化工、生物制药、暖通空调、电镀涂装、干燥设备、橡塑机械、食品饮料、造纸、印染及电力矿业等行业。

1、 Overview of imported ultra high temperature solenoid valve products:

Locke (Germany) - imported high temperature solenoid valve refers to the solenoid valve with high temperature resistant material, temperature resistant coil, hard to burn, precision casting and beautiful appearance. It is suitable for the automatic control of medium and high temperature hot water, heat transfer oil, high temperature steam, saturated steam and superheated steam. It is widely used in medical devices, electronic equipment, electronic equipment and so on Clothing equipment, petrochemical, biopharmaceutical, HVAC, electroplating coating, drying equipment, rubber and plastic machinery, food and beverage, paper making, printing and dyeing, power mining and other industries.

二、进口超高温电磁阀技术参数：

公称通径：DN15～300mm

原理结构：先导活塞式

环境温度：-10～+50℃ -40～+80℃

线圈温度：<+50℃、<+85℃

控制方式：常闭、常开、自保持

公称压力：0.1～300Mpa

阀体材质：铸钢、不锈钢304、316

适用介质：气、水、油、蒸汽、燃气、腐蚀性流体

介质温度：≤800℃

介质粘度：小于50CSt （大于50时需定制）

防护性能：防水、防尘、防爆（Exd IICT5）、防腐

阀芯材质：均为不锈钢

接线方式：接线座式、引线式、插头式

电源电压：DC12、DC24V、DC36V、DC110V、DC127V、DC220V、DC380V；

                AC24V、AC36、AC110V、AC127V、AC220V、AC380V

连接方式：法兰、内螺纹、外螺纹、卡套、焊接

泄 漏 量：零泄漏

备      注：特殊型可定制

2、 Technical parameters of imported ultra high temperature solenoid valve:

Nominal diameter: DN 15 ～ 300 mm

Principle and structure: pilot piston type

Ambient temperature: - 10 ～ + 50 ℃ - 40 ～ + 80 ℃

Coil temperature: < + 50 ℃ and < + 85 ℃

Control mode: normally closed, normally open, self holding

Nominal pressure: 0.1 ~ 300mpa

Valve body material: cast steel, stainless steel 304, 316

Applicable media: gas, water, oil, steam, gas, corrosive fluid

Medium temperature: ≤ 800 ℃

Medium viscosity: less than 50cst (customized when more than 50)

Protection performance: waterproof, dustproof, explosion-proof (Exd iict5), anti-corrosion

Valve core material: stainless steel

Wiring mode: wiring base type, lead type, plug type

Power supply voltage: DC12, DC24 V, dc36 V, dc110 V, dc127 V, DC220 V, dc380 V;

AC24V、AC36、AC110V、AC127V、AC220V、AC380V

Connection mode: flange, internal thread, external thread, ferrule, welding

Leakage: zero leakage

Note: special type can be customized

三、进口超高温电磁阀工作原理：

常闭：当线圈通电时，电磁铁芯吸合，卸压孔打开，主活塞由介质压力推动，打开主阀口，介质流通。

          当线圈断电时，主阀口关闭，介质截止。

常开：当线圈通电时，电磁铁芯吸合，卸压孔关闭，主活塞由介质压力推动，关闭主阀口，介质截止。

          当线圈断电时，主阀口打开，介质流通。

3、 Working principle of imported ultra high temperature solenoid valve:

Normally closed: when the coil is energized, the electromagnet core is closed, the pressure relief hole is opened, the main piston is pushed by the medium pressure, the main valve port is opened, and the medium flows.

When the coil is powered off, the main valve port is closed and the medium is cut off.

Normally open: when the coil is energized, the electromagnet core is closed, the pressure relief hole is closed, the main piston is pushed by the medium pressure, the main valve port is closed, and the medium is cut off.

When the coil is powered off, the main valve port opens and the medium flows.

四、进口超高温电磁阀性能特点：

1、耐磨损：选材合理，阀塞与阀间巧妙地利用流体润滑作用，减少磨损。

2、耐腐蚀：主要部件阀塞、阀体等采用不锈钢和铜合金制成，防腐性能好。

3、耐高温：密封材料采用耐高温材料，线圈部分采用耐高温电工材料，增设散热机构。

4、 Performance characteristics of imported ultra high temperature solenoid valve:

1. Wear resistance: reasonable material selection, skillful use of fluid lubrication between valve plug and valve to reduce wear.

2. Corrosion resistance: the main parts such as valve plug and valve body are made of stainless steel and copper alloy with good corrosion resistance.

3. High temperature resistant: the sealing material is high temperature resistant material, the coil part is high temperature resistant electrical material, and the peripheral heat dissipation mechanism is added.

Introduction to imported ultra-High temperature solenoid valve Roch, Germany High Temperature solenoid valve refers to the valve body and sealing materials used in High temperature, it is suitable for automatic control of middle and high temperature hot water, heat conducting oil, high temperature steam, saturated steam and superheated steam, etc. , widely used in medical equipment, clothing and equipment, petrochemical, biological pharmaceutical, HVAC, electroplating coating, drying equipment, rubber and plastic machinery, food and beverage, paper, printing and dyeing and Power Mining Industries. 2. Imported UHT SOLENOID valve technical parameters: nominal diameter: DN15 ~ 300MM principle structure: Pilot Piston Environment Temperature:-10 ~ + 50 °c-40 ~ + 80 °C Coil Temperature: & Lt; + 50 °C, & Lt; Sentence is too long, please supply a shorter sentence AC24V, AC36, AC110V, AC127V, AC220V, AC380V connection: Flange, internal thread, external thread, clamp, welding leakage: Zero Leakage Note: special type can be customized three, imported ultra-high temperature solenoid valve working principle: normally closed: when the coil is energized, sOLENOID core suction, pressure relief hole open, the main piston pressure driven by the media, open the main valve port, media flow. When the coil power off, the main valve port closed, the media cut-off. Normally Open: When the coil is energized, the electromagnetic core is absorbed, the pressure relief hole is closed, the main piston is driven by the medium pressure, the main valve port is closed, the medium is cut off. When the coil power off, the main valve opening, medium flow. Imported ultra-high temperature solenoid valve performance features: 1, wear-resistant: reasonable material selection, between the valve plug and the valve cleverly use of fluid lubrication, reduce wear. 2, corrosion resistance: The main parts of the valve plug, valve body and other made of stainless steel and copper alloy, corrosion resistance. 3, high-temperature: Sealing materials used high-temperature materials, coil parts used high-temperature electrical materials, the periphery of the installation of heat dissipation.