- 产品
- 详情
- 推荐
收藏
¥2860.00
1-49台
¥2350.00
≥50台
产品规格
规格: DN1～300
一、进口油用电磁阀产品概述：
德国《LOCKE》洛克--进口油用电磁阀(Oil solenoid valve)是指用于控制油、柴油、液压油、导热油、润滑油等油介质的开启和关闭的电磁阀，一般采用黄铜或者不锈钢材质，防爆，耐高压，耐高温，耐腐蚀。
1、 Overview of imported oil solenoid valve products:
Locke - imported oil solenoid valve refers to the solenoid valve used to control the opening and closing of oil, oil, crude oil, diesel oil, hydraulic oil, heat transfer oil, lubricating oil and other oil media. It is generally made of brass or stainless steel, explosion-proof, high pressure resistant, high temperature resistant and corrosion-resistant.
二、进口油用电磁阀技术参数：
通径范围：DN10-300mm
工作环境温度：-30—+80℃;-50—+100℃
线圈工作温度：<+50℃、<+85℃
控制方式：常闭式、常开式
国际标准电压：AC(380、220、110、24)V、DC(220、110、24、12)V
流通流体介质：汽油、柴油、导热油等
流通流体温度：<-40℃、<+60℃、<+120℃、<+200℃ 、<+350℃
流通流体压力：-1-64bar
阀体材质：不锈钢(304、316、316L)、铸钢
连接方式：螺纹(内螺纹，外螺纹)法兰、焊接、卡箍、活接
泄漏量：零泄漏
2、 Technical parameters of imported oil solenoid valve:
Diameter range: DN 10-300 mm
Working environment temperature: - 30 - + 80 ℃- 50—+100℃
Coil working temperature: < + 50 ℃ and < + 85 ℃
Control mode: normally closed and normally open
International standard voltage: AC (380, 220, 110, 24) V, DC (220, 110, 24, 12) V
Circulating fluid medium: gasoline, diesel oil, kerosene, heat transfer oil, etc
Circulating fluid temperature: < - 40 ℃, < + 60 ℃, < + 120 ℃, < + 200 ℃, < + 350 ℃
Flow fluid pressure: - 1-64bar
Valve body material: stainless steel (304, 316, 316L), cast steel
Connection mode: threaded (internal thread, external thread) flange, welding, clamp, union
Leakage: zero leakage
三、进口油用电磁阀工作原理：
常闭：当线圈通电时，先导阀芯吸合，先导孔打开，阀上腔卸压，活塞靠下腔介质压力推动，电磁阀打开。当线圈断电时，先导阀芯靠弹簧复位，先导孔关闭，阀上腔由活塞节流孔增压和复位弹簧的推力，电磁阀关闭。
常开：当线圈通电时，先导阀芯靠弹簧复位，先导孔关闭，阀上腔由活塞节流孔增压和复位弹簧的推力，电磁阀关闭。当线圈断电时，先导阀芯靠弹簧复位，先导孔打开，阀上腔卸压，活塞靠下腔介质压力推动，电磁阀打开。
3、 Working principle of imported oil solenoid valve:
Normally closed: when the coil is energized, the pilot valve core is closed, the pilot hole is opened, the pressure in the upper chamber of the valve is relieved, the piston is pushed by the medium pressure in the lower chamber, and the solenoid valve is opened. When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is closed, the upper chamber of the valve is pressurized by the piston orifice and the thrust of the reset spring, and the solenoid valve is closed.
Normally open: when the coil is energized, the pilot valve core is reset by the spring, the pilot hole is closed, the upper chamber of the valve is pressurized by the piston orifice and the thrust of the reset spring, and the solenoid valve is closed. When the coil is powered off, the pilot valve core is reset by the spring, the pilot hole is opened, the pressure in the upper chamber of the valve is relieved, the piston is pushed by the medium pressure in the lower chamber, and the solenoid valve is opened.
四、进口油用电磁阀性能特点：
1、油品种类繁多，密封件技术是关键之一。耐油橡胶只是类别名称，不同的油甚至同种油所含杂质不同就需选不同的耐油橡胶。例如，能耐有铅汽油就不一定耐无铅汽油。近年来随专用电磁阀销量的增多，专用耐油橡胶的寿命也不断提高。
2、油品的粘度差异很大，须选用不同结构的电磁阀。高粘度的油还常在高温的状态下流通，所以电磁阀还随之要解决耐高温的问题。对于燃油还需满足防爆要求。
4、 Performance characteristics of solenoid valve for imported oil:
1. There are many kinds of oil products, and seal technology is one of the key technologies. Oil resistant rubber is just a kind of name. Different oils and even the same kind of oil have different impurities, so different oil resistant rubber should be selected. For example, the ability to withstand leaded gasoline is not necessarily resistant to unleaded gasoline. In recent years, with the increase of sales volume of special solenoid valve, the service life of special oil resistant rubber is also increasing.
2. The viscosity of oil products is very different, so the solenoid valve with different structure should be selected. High viscosity oil is often in the state of high temperature circulation, so the solenoid valve also will solve the problem of high temperature resistance. For fuel oil, it also needs to meet the explosion-proof requirements.
-
13512192636
-
021-51870709
进口油用电磁阀 德国洛克油用电磁阀
¥ 2350.00 ~ ¥ 2860.00
- DN1～300
-
¥2350.00
200台可售
询价单发送成功～