- 产品
- 详情
- 推荐
收藏
¥98.00
1-49台
¥90.00
≥50台
产品规格
规格: DN15-100
一、进口铜闸阀产品概述：
进口铜闸阀关闭时,密封面可以只依靠介质压力来密封，即只依靠介质压力将闸板的密封面压向另一侧的阀座来保证密封面的密封，这就是自密封。大部分闸阀是采用强制密封的，即阀门关闭时，要依靠外力强行将闸板压向阀座，以保证密封面的密封性。闸阀是通过手轮转驱闸板沿通道轴线垂直方向移动切断接通介质流的控制部件，在使用过程中，阀门必须是全开或全关，不能用作调节流量。
二、进口铜闸阀技术参数：
工作压力：1.6-32MPA
工作温度：-40°C- 550°C
闸阀口径： DN15-DN600
连接方式：法兰、焊接、内螺纹
传动方式：手动、正齿轮、伞齿轮、气动、电动
适用介质：水、油品、气体、蒸汽、酸类
制造标准：国标、美标、日标、德标
1、 Introduction of imported bronze gate valve products:
When the imported bronze gate valve is closed, the sealing surface can only rely on the medium pressure to seal, that is, only rely on the medium pressure to press the sealing surface of the gate to the seat on the other side to ensure the sealing surface, which is self sealing. Most gate valves are forced to seal, that is, when the valve is closed, the gate should be forced to the valve seat by external force, so as to ensure the tightness of the sealing surface. The gate valve is a control component which cuts off the medium flow through the vertical movement of the gate along the channel axis through the hand wheel. In the process of use, the valve must be fully open or closed, and can not be used to adjust the flow.
2、 Technical parameters of imported bronze gate valve:
Working pressure: 1.6-32mpa
Working temperature: - 40 ° C - 550 ° C
Diameter of gate valve: DN 15-dn 600
Connection mode: flange, welding, internal thread
Transmission mode: manual, spur gear, bevel gear, pneumatic, electric
Applicable media: water, oil, gas, steam, acids
Manufacturing standards: national standard, American Standard, Japanese standard and German standard
-
13512192636
-
021-51870709
进口铜闸阀 德国洛克LOCKE青铜闸阀
¥ 90.00 ~ ¥ 98.00
¥ 90.00
200台可售
询价单发送成功～