- 产品
- 详情
- 推荐
收藏
¥ 20.00
25千克起订
产品规格
可售数量： 46000千克
吹塑级PC韩国LG/1300-03/高粘度
PC塑胶原料分类：
防静电PC、导电PC、加纤防火PC、抗紫外线耐候PC、食品级PC、抗化学性PC。光扩散PC。
PC塑料主要优点：
1．具高强度及弹性系数、高冲击强度、使用温度范围广；
2．高度透明性及自由染色性；
3．成形收缩率低、尺寸安定性良好；
4．耐疲劳性佳；
5．耐候性佳；
6．电气特性优。
代理供应PC韩国LG 1201-10
代理供应PC韩国LG 1201-15
代理供应PC韩国LG 1201-18
代理供应PC韩国LG 1201-22
代理供应PC韩国LG 1201HP-08
代理供应PC韩国LG 1261-03
代理供应PC韩国LG 1300-03
代理供应PC韩国LG 1300-10
代理供应PC韩国LG 1300-22
代理供应PC韩国LG 1301-12
代理供应PC韩国LG 1301EP30
代理供应PC韩国LG 1301V-10
代理供应PC韩国LG 1302-05
代理供应PC韩国LG 1302-07
PC塑料主要性能：
1．机械性能：强度高、耐疲劳性、尺寸稳定、蠕变也小（高温条件下也极少有变化）；
2．耐热老化性：增强后的UL温度指数达120~140℃（户外长期老化性也很好）；
3．耐溶剂性：无应力开裂；
4．对水稳定性：高温下遇水易分解(高温高湿环境下使用需谨慎）；
Huayun Plastic Company 5. Electrical Performance: 6. Insulation performance: Excellent (moisture, high temperature can also maintain electrical performance stability, is the manufacture of electronic, electrical parts of the ideal material) ; 7. DIELECTRIC COEFFICIENT: 3.0,3.2; 8. Arc Resistance: 120 S;
9. FORMABILITY: General Equipment for injection or extrusion. Shortening molding period e and forcing demoulding Prolongation of the molding period and the shape of a Florida Using Release Agent Warping A, in-mold cooling is not sufficient for reducing molding temperature, the temperature difference of the punch, The die, the gate position and the size of the gate are unreasonable, the injection pressure is too high, the injection pressure is too high, the temperature of the barrel is too high, the locking force of the mold is too high, and the processing precision of the mold is too low. Store in a dry place, press.
-
13556776933
-
0769-87600377
吹塑级PC韩国LG/1300-03/高粘度
¥ 20.00
¥20.00
46000千克可售
询价单发送成功～